Search Jobs

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The City of Lincoln is hiring for the position of Maintenance Worker I/II within the Streets Division of the Public Works Department.  Under general supervision, this position performs the full array of duties assigned to classes in the Maintenance Worker series including maintenance, construction and equipment operation work in one or more Public Works divisions; occasionally assists in the training of lower-level Maintenance Workers; and performs other related duties as required.

Maintenance Worker I

The Maintenance Worker I is the entry level class responsible for a wide variety of maintenance and construction tasks. This classification is alternatively staffed with Maintenance Worker II and incumbents may advance to the higher-level after gaining experience and demonstrating a level of proficiency that meets the qualifications of the higher-level class.

Maintenance Worker II

The Maintenance Worker II is the journey level class responsible for a wide variety of maintenance and construction tasks. This classification is distinguished from the next higher classification of Senior Maintenance Worker in that the latter performance the more complex assignments and lead responsibilities.

SUPERVISION RECEIVED/EXERCISED

The Maintenance Worker I receives general supervision from a Public Works Supervisor.  Incumbents of this class do not routinely exercise supervision.  The Maintenance Worker II receives general supervision from a Public Works Supervisor. May exercise technical and functional supervision over assigned staff. 

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Performs maintenance, repair, construction, equipment operation and installation work in streets, water, sewers, refuse collection, parks and buildings.
• Streets: Breaks, removes, crack seals, hydropatches, and repairs surfaces; digs, shovels, hauls, loads and unloads materials; operates jack hammers, tampers, pavement breakers and other hand and power tools; rolls and irons asphalt; operates trucks, backhoes, rollers, pavers, street sweepers and other construction vehicles and equipment; assists in the installation and maintenance of City signs, road markings, striping and delineators; paints street lines and crosswalks; performs concrete sidewalk, curb, gutter and ramp installation and repair; installs, maintains and repairs street lights; installs shoring and trench plates; monitors underground service alert (USA’s) and marks when necessary; conducts street leaf pickup; mows roadsides.
• Water Distribution and Drainage: Constructs, maintains and repairs storm conduits, curbs, gutters and drainage facilities; installs, repairs and maintains water mains and lines; conducts maintenance at well sites; monitors pump stations; operates jack hammers and other tools and equipment; inspects tools and equipment for safety and mechanical defects; installs and repairs water service connections, meters and boxes; performs monthly meter reads; repairs, installs and tests hydrants; monitors USA’s and marks when necessary; operates trucks and other construction vehicles and equipment; locates and repairs leaks in water lines; cleans storm drains, flood control facilities and inlets; operates sewer camera and hydrovac.
• Parks and Buildings: Maintains lawns, shrubs, and trees; assists in spraying of herbicides and pesticides; cuts, sprays and removes weeds; clears brush and debris; assists with planting and maintenance of landscaped areas; installs, maintains, repairs and programs irrigation systems; cleans and maintains parks and city buildings; assists in the performance of minor carpentry, plumbing, electrical, painting and remodeling tasks.
• Solid Waste: Operates a variety of collection vehicles and equipment including front, rear and side loaders in the collection and transportation of residential and commercial refuse; drives to landfill site when vehicle is full and unloads material; evaluates and updates assigned routes; cleans, maintains and inspects assigned vehicles; maintains daily logs.
• Fills out reports and work orders; climbs or uses hydraulic aerial devices to top, trim, reshape, strip, treat and remove trees; operates airport fueling vehicles; responds to after-hours call-outs if assigned.
• Demonstrates a full understanding of applicable policies, procedures and work methods associated with assigned duties; may provide training to lower-level staff; responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position:

Knowledge of: Practices, techniques and materials used in maintenance, construction and repair of streets, buildings, parks and water treatment facilities; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to: Safely and effectively operate a variety of maintenance equipment, tools and materials.

Ability to: Perform maintenance, repair and installation of asphalt, signs, concrete, water mains and storm drains; drive and operate trucks and heavy construction equipment; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of construction equipment, vehicles and power and hand tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to after-hours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to the process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical/drug-test evaluation and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team allows you to make a significant impact in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

The department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Regulatory Compliance and Policy Division.

The ideal candidate is a skilled and highly motivated individual, with creative problem-solving skills, the ability to learn quickly, and the desire to work both independently and collaboratively. Good judgment, initiative, and cooperation with other staff and outside stakeholders are assets to this position. Under general direction of the Deputy Director, this position will be responsible for supporting the division's engagement in state regulatory affairs to protect and advance San José policy, business, and community interests.

Typical duties of this position may include, but are not limited to:
• Monitor, review, interpret, and explain to a variety of audiences regulatory proposals and other policy issues with an eye toward impact on SJCE and its customers.
• Respond to compliance and data requests by gathering relevant data, drafting reports, and receiving approvals within designated timeframes.
• Support the preparation of comments, position papers, testimony, and the like related to a variety of technical regulatory proceedings impacting SJCE energy procurement, energy management, and electric rates.
• Work independently and with stakeholders to influence state policy.
• Build and maintain stakeholder relationships including non-profit, business, and government entities, and where appropriate build regional and statewide coalitions to support the interests of the department.
• Work closely with technical experts and external regulatory counsel to develop effective and persuasive communications before state agencies as required.
• Represent SJCE in work with other CCAs and with SJCE's state trade association
• Manage a portfolio of regulatory proceedings and/or compliance reporting, including tracking issues, analyzing potential impacts, engaging with stakeholders, and communicating with other internal divisions.
• Perform other related duties as required.

THIS IS A CITYWIDE EXAM

The City and County of San Francisco has Maintenance Machinist vacancies at various departments Citywide.

San Francisco is a vibrant and dynamic city, on the forefront of economic growth & innovation, urban development, arts & entertainment, as well as social issues & change. This rich tapestry of culture and ideas is sustained by our City's commitment to heighten the quality of life for San Franciscans and residents of the greater Bay Area. Our employees play an important role not only in making our City what it is today, but also in shaping the future of San Francisco. 

Specific information regarding this recruitment process is listed below:

• Application Opening: May 31, 2024
• Application Deadline: Apply Immediately. Application filing will be open at least through Monday, June 24, 2024, and will close any time thereafter.
• Compensation Range: $103,116 - $125112 Annually (Appointments to this job class enter at Step 5)
• Recruitment ID: CBT-7332-148209 

Job Description

This position performs preventive, routine and emergency maintenance and repair of a variety of heavy and light industrial and marine equipment, related systems and components. The incumbent will operate precision equipment and respond to trouble calls associated with the Port's ferry terminal systems, boats, sewer pumps and other Port related equipment. The nature of this work requires sustained physical effort frequently under adverse weather conditions and/or working in confined spaces. The incumbent may be required to work alternative shifts in order to do tide-dependent work.

Nature of Work: Some positions may involve exposure to adverse physical and working condition and lifting objects weighing in excess of 70 pounds. Incumbents will be required to work varying hours and/or shifts, including weekends, evening and holidays in a 24 hour/7 days-a week operation.

The City of San José is one of the nation's best-managed cities and one of the top ten cities in which to live, work, and do business. The employees of the City have embraced the following values: Integrity, Innovation, Excellence, Collaboration, Respect, and Celebration. The City's Public Works Department (PWD) is seeking an individual whose values align with the values of the City's employees.

The PWD has the primary responsibility to deliver facilities and infrastructure that meets the needs of the residents of San Jose and comply with the standards and requirements established in the engineering guidelines and the City's Master Plans. The PWD achieves its goals through planning, design and construction of the City's capital projects, and through the plan review and permit process to regulate and facilitate private development projects. The PWD is committed to high-quality service, partnering with the community, and providing an excellent environment in which to work.

Salary Information
The salary range for Maintenance Worker II is $64,604.80- $78,582.40.
Actual salary shall be determined by the final candidates' qualifications and experience.The Department of Public Works is seeking to fill a Maintenance Worker I position in the HVAC Shop located at the Central Service Yard within the Facilities Management Division. The Maintenance Worker I will support the basic preventative maintenance of the air conditioning work group. This position reports directly to the Air Conditioning Supervisor for various daily assignments. Working under immediate supervision and working with HVAC Staff and/or independently in mechanical rooms and on rooftops would be a regular occurrence.

Typical duties include but are not limited to:

• Performs preventive maintenance functions on Exhaust Fans, HVAC Package units and Air Handlers.
• Clean HVAC Cooling Towers and Mechanical Rooms.
• Install V-belts on HVAC Equipment.
• Uses general carpentry, mechanical and hand tools such as power saws, hand saws, drills, pliers, wrenches, hammers, screwdrivers, ladders and other tools and equipment.
• Installs air filters in various types of air conditioning equipment.
• Cleans aluminum finned condenser and evaporator coils.
• Performs minor semi-skilled carpentry and plumbing repair work.
• Maintains database records of their daily work with the Departments inventory management system.

This position may require working some weekends and/or holidays. Ability to perform the essential functions of this position will be determined by a post-offer medical examination conducted by City of San Jose Employee Health Services.

The HVAC SHOP maintains all City-Wide Facilities, including Police Buildings. The San Jose Police Department requires all civilians working at their facilities pass a background check and obtain a Civilian Police Badge. The Maintenance Worker I candidate will be expected to apply for and successfully pass the Police Department background check, to successfully pass their probationary period.

This recruitment may be used to fill multiple positions in this, or other divisions or departments. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.

The City of Berkeley is now accepting applications for the position of Health Services Program Specialist! In this role, you will plan and manage a specialized health program. Program-planning activities will include development of procedures for operation and evaluation and fiscal and budgetary administration. You will also liaise with program personnel to assure proper integration of program planning and evaluation with program operations. 

MINIMUM QUALIFICATIONS
A typical way of gaining the knowledge, skills, and abilities for this position is:
Equivalent to graduation from a college or university with major course work in public health, health or social-services related field, or health-related public policy, and two years of experience as a health/social services professional.

One year supervisory experience which has included budget and program development is desirable.

Other requirements: Must be willing to work evenings and weekends and be able to travel to various locations within and outside the City of Berkeley to meet the program needs and to fulfill the job responsibilities. For automobile travel, a valid California driver's license and satisfactory driving record are required.

APPLICATION PROCESS
Applications must be received by 5:00 PM Pacific on June 10, 2024 and must include a completed application and answers to the supplemental questions. Please note that resumes are not a substitute for a completed application.

Applications are available in alternative formats (audio-format, braille, large print, electronic text, etc.) upon request to ada@berkeleyca.gov. Please allow 10 days for production of the material in an alternative format.

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team means that you will be making a big impact and in the forefront in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

This department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Risk Management and Contracts Administration Division.

This position is part of an exciting fast-paced team responsible for mitigating risks and managing a power portfolio comprised of hundreds of megawatts of renewable energy projects.

The selected candidate will have the following duties and responsibilities:

• Evaluate, review, and validate the accuracy of market positions and risk metrics such as mark-to-market, value at risk, gross margin at risk.
• Perform quantitative and analytical data modeling to quantify risks, evaluate risk reduction strategies, aid strategic/ operational decision making and provide insights.
• Update, manage and validate accuracy of Power BI business intelligence dashboards related to energy risk management such as risk limits, forward prices, collateral.
• Execute monthly and ad-hoc data reporting and quantitative modeling tasks.
• Validate and forecast collateral calls from counterparties and the CAISO and verify accuracy of collateral records.
• Collaborate with different divisions and IT department to support the build and implementation of data repository.
• Provide analytical support for power purchase and sale agreements and power supply audits.
• Compile reports, summaries, and presentations to communicate findings to management.
• Understand SJCE Risk Management Policy and Regulations and manage reviews and amendments.
• Support the development of middle office procedures.
• Monitor and evaluate energy market risks and market events. Develop and share knowledge of energy industry trends, new developments, and emerging risks.
• Perform other duties that may be assigned from time to time.

The ideal candidate is a highly motivated individual with strong analytical, quantitative, and problem-solving skills. The candidate should have effective communication skills, show attention to detail, and be able to work independently. Candidates that are highly collaborative with colleagues and outside stakeholders are ideal.

The Risk Management and Contracts Administration Division is responsible for providing independent oversight of the risks in transacting for energy products and services as well as ensuring compliance with adopted risk management policies and procedures. This unit provides strategic support to facilitate the development and execution of various contracts, and also manages the contracts administration and settlements function.

Competencies

The ideal candidate will possess the following competencies, as demonstrated in past and current employment history. Desirable competencies for this position include:

• Job Expertise - Demonstrates knowledge of applicable professional/technical principles and practices, Citywide and departmental procedures/policies and federal and state rules and regulations.
• Analytical Thinking - Approaches a problem or situation by using a logical, systematic, sequential approach.
• Initiative - Exhibits resourceful behaviors toward meeting job objectives; anticipates problems, is proactive, and avoids difficulties by planning ahead; displays willingness to assume extra responsibility and challenges; pursues continuing education opportunities that promotes job performance.
• Problem Solving - Approaches a situation or problem by defining the problem or issue; determines the significance of problem; collects information; uses logic and intuition to arrive at decisions or solutions to problems that achieve the desired outcome.
• Teamwork & Interpersonal Skills - Develops effective relationships with co-workers and supervisors by helping others accomplish tasks and using collaboration and conflict resolution skills.
• Multi-Tasking - Can handle multiple projects and responsibilities simultaneously; has handled a wide variety of assignments in past and/or current position(s).
• Computer Skills - Experienced with common business computer applications including but not limited to: MS Outlook, MS Word, MS PowerPoint, MS Access, MS Excel, as well as data visualization and modeling tools.
• Communication Skills - Effectively conveys information and expresses thoughts and facts clearly, orally and in writing; demonstrates effective use of listening skills and displays openness to other people's ideas and thoughts. Demonstrates basic knowledge of negotiation skills.

Salary Information:

Power Resources Specialist I is $99,503.04 - $121,255.68.

Power Resources Specialist II is $108,282.72-$131,913.60.

This range includes an approximate five (5%) ongoing on-pensionable pay. Actual pay shall be determined by the candidate's qualifications and experience.