Search Jobs

The City of Healdsburg is seeking a full-time Senior Project Manager to join the Public Works Department. This position will have a primary focus on the City’s Capital Improvement Program (CIP). This is an opportunity to gain a diverse range of hands-on experience in municipal engineering, collaborate across department lines and serve on several amazing upcoming projects, including:

• 4,200 square-foot Fire Substation
• Front Street Pedestrian and Bicycle Improvement
• $15 M – Federal Grant Funded – Healdsburg Avenue Complete Streets Project
• Federal Grant Funded – Grove Street Neighborhood Plan Implementation
• Healdsburg Avenue/Mill District Connectivity
• FAA Funded – Airport Taxiway Improvements

There will be no shortage in projects, as Healdsburg continually collaborates with colleagues and stakeholders on CIP with a strong focus in innovation, efficiency, and sustainability that values our diverse community.

By joining our team at the City of Healdsburg, you can take advantage of our amazing benefits, such as low to no cost health insurance rates, CalPERS retirement pension, City sponsored LTD and $100,000 Life Insurance, 40+ hours of management leave and generous paid time off! 

The salary range for the Senior Project Manager position is $118,450.43 - $144,532.78 annually. In addition to a competitive salary, retirement through CalPERS and generous benefits package, you may be eligible for a hiring incentive and relocation assistance:

• Up to $2,500 upon hire and $2,500 upon successful completion of probation.
• Relocation Assistance up to $2,500 for candidates outside of a 100-mile radius of the city.

The deadline to apply for this position is September 4, 2024, at 11:59pm. 

Applications will be reviewed on the 1st and 15th of each month. Interviews may be scheduled at any time until the position have been filled. This recruitment may be closed at any time without notice. Prompt application is encouraged. 

To review the full position description, and to submit an application, visit: Healdsburg.gov/jobs

**The City of Healdsburg has one vacancy within the Public Works Department's Capital Improvement Projects Division that may be filled at Senior Project Manager classification or, upon City Council approval, at the Senior Civil Engineer classification. Placement upon hire is dependent on recruitment outcome. To be considered for both positions, you must apply to the separate, concurrent recruitments being conducted. Applicants are encouraged to review the minimum qualifications for each position**
 

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, the Plant Operator II during an assigned shift is responsible for operation of the wastewater treatment plant and for maintaining a variety of machinery and equipment.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digesters, centrifuge, chlorinators and valves to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and control panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases, and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records and shift logs; assists in the training of other plant operators, makes operating decisions in the absence of supervisory personnel; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electrical motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in the water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant, make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: Two years experience in water quality control plant operations. Specialized training may be substituted for 6 months experience.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, standing, bending, climbing, and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade II Operator's Certificate and possession of a valid Class C California Driver's License (including acceptable driving record).

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, operates and maintains equipment and facilities of the water quality control system, and performs other related work as required.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digester, centrifuge chlorinators to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and controls panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electric motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in a water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant; make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: One year of experience in mechanical maintenance and/or water quality control plant operations.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, bending, climbing and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade I Operator's Certificate; possession of a valid Class C California Driver's License (including acceptable driving record).

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team means that you will be making a big impact and in the forefront in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

This department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Power Resources Division.

The Power Resources Specialist I/II position reports to a Principal Power Resources Specialist in the Power Resources Division. This position is part of an exciting, fast-paced team responsible for procuring hundreds of megawatts of renewable energy projects.

The selected candidate will have the following duties and responsibilities:

• Supports the preparation, issuing, and evaluation of solicitations related to Energy, Resource Adequacy and Renewable Energy Credits.
• Assists with the evaluation of pre- and post-release solicitation materials for long-term energy projects such as stand-alone and collocated energy storage, wind, and solar resources.
• Assists in the management, analyzing, and enforcing of power contracts, including long-term energy contracts through development, construction, and operation.
• Assists in the management and resolution of matters related to resources performance within the California Independent System Operator's energy and capacity markets.
• Supports SJCE Scheduling Agent, particularly focusing on stand-alone and collocated storage and renewables, based on SJCE's internal strategies and policies.
• Conducts primary research related to SJCE obligations within the CAISO, CPUC, and other regulatory frameworks with particular focus on matters related to stand-alone and collocated storage, and renewable energy assets.
• Participates in completing analysis and prepare procurement plans, including managing consultants, and developing procurement strategies.
• Supports and undertakes projects related to power, procurement, and validation; assists in the approval of energy purchases or sales of surplus energy.
• Participates in joint procurement with other Community Choice Aggregators (CCAs) and CA Community Power.
• Develops and maintain relationships with power suppliers and consultants.
• Assures compliance with Federal, State, and local requirements.

The ideal candidate is a highly motivated individual with strong analytical, quantitative , and problem-solving skills. The candidate should have effective communication skills, show attention to detail, and be able to work independently. Candidates that are highly collaborative with colleagues and outside stakeholders are ideal.

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

This position is open until filled. The first review of applications will be May 28, 2024. Applications are reviewed in the order received.

*Effective July 2024, this position will receive a 2.5% base salary increase.

THE POSITION

Reporting to the Director of Administrative Services, the Management Analyst (Risk Management) provides professional support to risk management programs including: workers' compensation, safety compliance, review and approval of contracts and Certificates of Insurance, risk transfer, and leave and disability administration. 

In addition, you will have the opportunity to coordinate and oversee workers' compensation claims administration including monitoring accepted claims and providing information to claimants, attorneys, and the workers' compensation carrier. You will also serve as a consultant to City departments and employees on Risk Management (workers' compensation, safety, contract insurance) problems and communicate regularly with internal and external parties to maximize the effectiveness and efficiency of assigned programs and activities, minimize risk, and advise of claim developments. This position will also support the City's leave management program.

To view the entire job description, click here.

ABOUT YOU

We are looking for a solution-focused problem solver who is responsive to organizational needs and open to new ideas and approaches to deliver HR services. Additionally, our ideal candidate will:

• Have a demonstrated ability to manage and organize multiple HR projects and priorities. 
• Understand and apply principles and practices of being an HR Business Partner.
• Have a strategic perspective and the ability to see the long-term impact of projects and initiatives.
• Be an outstanding communicator with exceptional interpersonal, analytical, written, verbal communication, and presentation skills.
• Proven technical skills and the desire to be a generalist in the HR functional areas assigned.

MINIMUM REQUIREMENTS

Possession of a bachelor's degree with major coursework in public or business administration, finance, human resources, economics, or a closely related field;

AND

Three (3) years of increasingly responsible professional experience performing public administration, finance, housing, or human resources functions; or

One (1) year of experience at a level equivalent to the City’s class of Associate Management Analyst or Administrative Analyst.

When assigned to a specific functional area as noted above, additional knowledge and experience in such area may be desirable.

Public sector experience is preferred.

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver's License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis. 

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.