Search Jobs

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Maintenance Operations Department is recruiting for the position of Street Maintenance Worker I. 

This recruitment will close on June 6, 2024 at 5:00 PM (PT) or when the first 250 applications are received, whichever comes first. Please apply promptly. A resume must be submitted with the completed online application. Applications submitted without a resume may not be considered. Only online applications will be accepted.

The current vacancy is assigned to Asphalt and Concrete. If you are interested in employment in this job classification, you should apply to ensure you are considered for future opportunities that may utilize the candidates from this recruitment.

Examples of Job Duties: 

• Cleans work sites and equipment.
• Perform installation of various traffic control devices and markings.
• Drives truck with trailer.
• Performs heavy physical labor including lifting, carrying heavy objects; and shoveling, raking, and leveling asphalt.
• Clears and cleans roadsides, gutters, culverts and other drainage facilities.
• Participates in the removal, repair and replacement of storm drainage pipe.
• Sets-up and removes traffic safety zones for construction.
• Works in all weather conditions and in all terrain conditions.
• Works at all times of day and night.
• Perform preventative maintenance, adjustments and minor repairs on equipment.
• Cleans equipment, grease, lubricate, and fuel vehicles.
• Perform inspection and cleaning of drain inlets and storm lines.

Asphalt and Concrete Assignment:

• Repairs and replaces asphalt and concrete.
• Applies, rake, and tamp asphalt to perform Class A patching, skin patching, and sand sealing surface cracks.
• Uses rake, shovel, and pick in street repair work.
• Removes failed asphalt.
• Sprays oil on excavated area and over patches.
• Selects proper tip and angle of cut for jackhammer.
• Operates compressor, jackhammer and other power tools.
• Under supervision operate loader, backhoe, or storm drain cleaning machines.
• Performs concrete repair work.
• Cuts lumber for concrete forms to proper size and place stakes.
• Breaks up and remove concrete.
• Spreads and level base rock.
• Mixes concrete; pour concrete into forms, tamp, jitterbug surface.
• Applies concrete finish with trowel, screed, float or other tools.
• Patch holes with fresh concrete.

 
Traffic Safety Assignment

• Replaces, maintains and repairs guard rails, traffic dividers, signs, and similar traffic control devices.
• Assists in determining color of paint to be applied to street markings.
• Selects proper stencils for street markings.
• Applies stripes and intervals for new street markings.
• Places stencils over old street markings, start compressor and spray inside stencils.
• Cleans and maintains spray equipment, including stencil truck; place and pick up traffic cones during the operation of the striping machine.
• Prepares traffic signs.
• Applies sheeting to metal sign blanks for background color, numbering and lettering.
• Trim sign edges.
• Assists with street sign installation.
• Participates in the installation of raised pavement markers.
• Operates striping machine.

Street Sanitation Assignment

• Controls and remove litter.
• Removes drain outlet cover.
• Cleans storm drains and lines using hand and power tools.
• Under supervision, operates storm drain cleaning machines.

Marginal Functions
All Assignments:

• Receives and responds to public questions concerning current and projected work projects, location of streets, and directions.
• Changes backhoe buckets and teeth.
• Other duties as assigned.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

THE POSITION

The City of Rocklin is looking for two Maintenance Workers to assist in the Parks Division of the Parks and Recreation Department. The Maintenance Worker is a temporary position and incumbents work on an as-needed basis, not to exceed 28 hours per week and up to 999 hours per fiscal year. Temporary employment does not provide any guarantee of continued employment and the City of Rocklin may end the assignment at any time. Temporary employees are not eligible for any other benefits except where required by law, and there is no guarantee of future permanent employment.

An example of duties are:

• Performs flood control measures by clearing creeks of obstructions, keeping drains clean and clear, and preparing sandbags in case of emergency.
• Performs crack sealing of asphalt, and backfilling trenches and excavations on City streets; performs repair, maintenance, and construction of sidewalks, curbs, and gutters.
• Removes concrete, builds forms, pours concrete, and performs other concrete work around City buildings as required.
• Empties trash cans, picks up and removes debris, litter, and trash from parks, athletic fields, trails, and landscaped areas throughout the City; removes graffiti and other unwanted markings from City-owned property.
• Plants, mows, prunes, and maintains turf, trees, shrubs, and plants; clears sites of weeds.
• Performs construction and repair of landscapes and other park facilities such as installing and maintaining signs, installing park structures, and installing and maintaining fences.
• Paints or stains and pressure washes and cleans park amenities and fencing.
• May apply pesticide, herbicide and other pest management treatments to vegetation and landscaped areas.
• Makes minor adjustments on service equipment; maintains tools and equipment in working order.
• Operates trucks, trailers, and other automotive equipment as required.
• Maintains logs of daily activities.
• Performs related duties as assigned.

MINIMUM REQUIREMENTS

Equivalent to graduation from high school
AND
Three (3) months of experience as a laborer in construction, maintenance, or landscaping work 

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

Sr. Business System Analyst - SAP Plant Maintenance/Material Management/Purchasing

VTA’s ERP Support Team Is looking for a dedicated Sr. Business System Analyst who will provide production support for SAP Enterprise Asset Management/Plant Management/Material Management/Procurement modules, managing the interfaces between SAP and non-SAP applications, and involving with a new/upgraded ERP implementation project. 

 

About VTA

The Santa Clara Valley Transportation Authority employs more than 2,000 people dedicated to providing solutions that move Silicon Valley. Unique among transportation organizations in the San Francisco Bay Area, VTA is Santa Clara County’s authority for transit development and operations (light rail and bus), congestion management, transportation-related funding, highway design and construction, real estate and transit-oriented development, and bicycle and pedestrian planning. With local, state, and federal partners, VTA works to innovate the way Silicon Valley moves and provide mobility solutions for all.  

Santa Clara Valley Transportation Authority (VTA) is an independent special district that provides sustainable, accessible, community-focused, innovative, and environmentally responsible transportation options promoting the region's vitality. VTA provides bus, light rail, and paratransit services and participates as a funding partner in regional rail services, including Caltrain, Capital Corridor, and the Altamont Corridor Express.  

To learn more, go to: vta.org

About the Division 
The Technology Department strives to provide the highest quality technology-based services and solutions, in the most cost-effective manner, to facilitate the needs of our customers within VTA and the customers VTA serves.   

Our Community 

Santa Clara County, sometimes referred to as “Silicon Valley”, is unique for its innovation, natural attractions, and social diversity. With numerous amenities and perfect weather, it has long been considered one of the best places in the United States to live and work. calendar of festivals and celebrations supports the community spirit. Nearby open space provides easy access to mountain parks, trails, lakes, streams, and beautiful coastal beaches. San José has received accolades for its vibrant neighborhoods, healthy lifestyle, and diverse attractions from national media, including Business Week and Money magazines.  

The county’s population of 1.9 million is the largest in Northern California and is rich in ethnic culture and diversity. Enjoy access and the option to explore our closely neighboring counties of San Francisco and Alameda. 

Ideal Candidate
The Ideal candidate will have extensive business process knowledge in the Transit Industry and functional experience in SAP Enterprise Asset Management/Plant Management/Material Management/Procurement modules. The candidate will also be involved in a new/upgraded ERP implementation project, and he/she needs to be a quick learner and be able to adapt to changing priorities with ease.
 

Definition

Under direction, the Senior Business Systems Analyst leads and participates in the work of staff in performing applications support in designing, implementing, and maintaining VTA applications and systems including VTA's Enterprise Resource Planning system, Electronic Documents Management System, and other business systems.

 

Distinguishing Characteristics

This is the advanced journey-level in the Business Systems Analyst series. Positions at this level are distinguished from other classes in this series by the level of responsibility assumed, in-depth knowledge about the business area, and complexity of the duties assigned. The Senior Business Systems Analyst performs project lead functions including assigning work, delegating assignments, and reviewing the work of others.

Incumbents at this level perform the most difficult and responsible types of duties assigned to classes in this series including serving as project lead over staff responsible for designing, installing, configuring, maintaining, and supporting computer applications, or modules of the application, and systems. Incumbents at this level are fully trained in all procedures related to their assigned area of responsibility. This classification implements solutions related to applications used in VTA's functional areas with a strong emphasis on process and flow design, custom functionality, and maintaining systems.

Classification Bargaining Unit: SEIU
Application Deadline: Posting will close 6/7/24 at 11:00pm

 

Essential Job Functions

Typical Tasks
 

• Leads and participates in the work of staff in managing projects, developing and enhancing system applications for an assigned division;
• Establishes and maintains positive relationships, and works extensively with VTA Management, VTA Business Process Owners, and system Super Users in developing and  enhancing information systems solutions;
• Trains customers, staff, and others as needed in a formal setting, in a group, or one-on-one;
• Administers a variety of actions to one or more modules of the Enterprise Resource Planning system (SAP), or Electronic Documents Management System (EDMS), or construction applications (such as Contract Manager, P6, Projectwise, Citicube, etc.) or other VTA applications or Reporting Services;
• Reviews and evaluates work products, methods and procedures, and identifies and resolves problems;
• Defines customer business needs, manages client expectations, and identifies alternative approaches and cost-benefits of automating of customer functions to assist in meeting the client's overall business goals;
• When assigned to a project, develops the scope of work for new or upgrade solutions and works with Contracts and Materials Management (CAMM) department during the Request for Proposal (RFP) and contracting phases of the process;
• Consults with customers to present proposals to senior management and assists in developing capital packages;
• Consults and facilitates with department representatives to solicit departmental technology needs and requirements as well as resolving problems with applications;
• Serves as a single point of contact for the user community in the assigned division, and assumes responsibility for the delivery of technology services;
• Maintains technical and functional competency in the applications utilized by the assigned department;
• Reviews, analyzes and approves program designs, operational characteristics, user interfaces, reporting systems and data conversion methods;
• Reduces design projects into component analytical tasks;
• Develops detailed workflow, system, training, and process requirements;
• Prepares final systems design and documentation and user documentation necessary for programming;
• Oversees the installation and updates of application packages, data base development tools, and other related elements;
• Defines and manages project scope, deliverables, schedules, cost estimates, and task lists;
• Performs development, review, and selection tasks related to Requests for Proposals and Requests for Qualifications;
• Communicates project status, resolving project issues, problems, and changes;
• Manages and tracks projects from initiation to successful completion;
• Establishes and maintains relationships at all levels of the assigned organization;
• Manages projects using VTA personnel, consultants, and vendors, as needed;
• Communicates with vendors of application software;
• May be required to monitors project expenditures, recommending adjustments as necessary;
• Performs related duties as required.

Minimum Qualifications

Employment Standards

Sufficient training, education and experience to demonstrate possession of the required technical and project management knowledge, skills and abilities.

Development of the required knowledge, skills and abilities is typically obtained through a combination of training and experience equivalent to graduation from an accredited college or university with a four-year degree in information systems, computer science or related field and four (4) years of responsible experience developing, designing, and/or maintaining major components of a comprehensive information system including evaluation, analysis and input to the software modules of an Enterprise Resource Planning System or other application system. (Additional applicable experience with applications and systems support, design, and maintenance substitutes for college on a year for year basis.) Incumbents must demonstrate substantial experience in an SAP environment, and/or Electronic Documents Management System, and/or Operations system (such as Trapeze, BDT, ACS) or Construction and CMP solutions.

A VTA employee designated as a "Business Process Owner" and/or "Super User" with four (4) years of experience in that capacity, in addition to performing and leading others in system upgrades and demonstrated technical coursework in SAP or systems used at VTA, meets the minimum qualifications for this classification. Experience with transit/transportation-related applications is desirable.

Interested applicants may only meet some of the requirements. We encourage applications from any person who believes they can thrive and grow within VTA. 
While we’re welcoming to a variety of different candidates, this position could be an excellent role for a number of different profiles, including those who: 
 

• Want to be team players with strong interpersonal skills, working within the community and VTA to help elevate and integrate equitable transit initiatives throughout our work 

• Are passionate, adaptable, and innovative team players who want to learn and contribute to the development of a visionary transit network through an equity lens 

• Are interested in collaborative and impactful, transformative change; working with supportive diverse teams to help grow our service and lead our region. 

Supplemental Information

Knowledge of:

• Extensive knowledge of at least one and a basic understanding of other Enterprise Resource Planning (SAP) system modules (such as Funds Management, Materials Management, Projects, Systems, Finance),  Reporting Services, Electronic Documents Management System and SharePoint, or Construction or CMP systems (such as Contract Management, Construction Scheduling, Document Management, Traffic Modeling, or Records Management);
• Systems analysis and design principles and procedures;
• Principles, potentials and limitations of electronic data processing equipment;
• Relational database design, implementation, maintenance and integration techniques to provide integrity, accuracy, security and performance efficiency;
• Project procurement process in the public sector;
• Management of vendors and consultants;
• Principles and practices of lead supervision and training;
• Computer programming, on-line programming, and programming documentation principles and techniques;
• Work planning and project management techniques.

Ability to:

• Evaluate processes proposed for business systems and enterprise systems modules, determine impact, and make decisions for recommended solutions and changes;
• Manage multiple projects involving personnel from multiple departments, as well as consultants and vendors;
• Multitask with a strong attention to detail and shift from one project to another when priorities change;
• Develop Crystal and/or Oracle and/or SQL and/or ACCESS or equivalent reports;
• Develop relationships with the user community;
• Analyze, design, program, install and maintain complex computer systems;
• Prepare and present comprehensive and clear reports and recommendations;
• Lead and direct the work of subordinate personnel;
• Train customers, staff and others, as needed;
• Independently perform the most difficult design and programming activities assigned;
• Communicate effectively, both orally and in writing;
• Prioritize complex and demanding workloads;
• Work with assigned division management on priorities and program definition;
• Keep current with changes within functional area, such as methods, practices, and technology;
• Establish and maintain cooperative working relationships with those contacted in the course of work;
• Organize work and manage time effectively.

What’s in it for You? 

Work/Life Balance: 40-hour work weeks, and a option of a flexible/hybrid remote schedule. 

Health: VTA participates in a CalPERS-sponsored medical plan with VTA contribution to employee and dependent premium health insurance premiums. Employees pay a monthly contribution of any amount in excess of the Kaiser Bay Area Family rate.  

Flex Spending Account: $300 employer-funded Health FSA for eligible employees  

Vision: VSP full premium for employees and eligible dependents  

Dental: Delta Dental full premium for employees and eligible dependents  

Mental Health Days: 3 days: May 1, 2023 - June 30, 2024  

Leave:  15 days of vacation (accrued), 96 Hours of sick time (accrued), and 13 paid holidays per year.

Retirement:  

- Participation in CalPERS  

• Classic Members: 2%@55  

• PEPRA Members: 2%@62  

- 457 Deferred Compensation Plan (voluntary)  

•  457 pre-tax  

• 457 Roth  

• Self-directed brokerage account option for qualifying employees  

- Retiree medical coverage for eligible employees with VTA contributions to the retiree’s medical premium  

Additional perks: 

- All active full-time employees and their eligible dependents are eligible for transit passes for use over VTA lines, including VTA Paratransit services.  

- Employee Assistance Program (EAP) is available to each employee, eligible dependent, and household member, 24 hours a day, seven days a week.  

- Tuition Reimbursement  

- Professional Development Fund  

- Wellness Programs  

As we continue to implement our VTA Forward Plan, we aim to strengthen and increase our workforce to take on future opportunities and challenges by elevating our people and our services.  

For more information about our VTA Forward Plan, visit: https://www.vta.org/VTAForward  

General Instructions 
Please read this entire job announcement before applying for the position. Print and keep a copy of this announcement so that you can refer to it. Questions not answered within this job announcement may be sent to personnel@vta.org.  

To ensure consideration, completed applications must be submitted online to the Human Resources department by the stated closing time and date posted. When the stated closing date is “continuous,” apply immediately; the position may close without notice. You will receive an immediate email confirming receipt of your submitted application. If you do not receive this email, contact NEOGOV's Applicant Assistance Line at (855) 524-5627 between 8:00AM to 5:00PM (PST) Monday through Friday, excluding holidays.  

Only on-line applications will be accepted for this recruitment (paper applications or resumes will not be accepted). Job Interest Notification Cards, or copies of previous, partial, or un-submitted applications, are not an acceptable substitute to a completed application.  

ALL APPLICATION AND TESTING NOTIFICATIONS WILL BE SENT BY E-MAIL. Applicants should select e-mail as the preferred method of notification. Candidates must maintain an up-to-date, valid and reliable e-mail address. Candidates are also responsible for maintaining up-to-date phone numbers and addresses on their on-line account. Due to the number of applications received, candidates must check their application status through their on-line account. Contact NeoGov for assistance if needed.  

Information on how to apply for jobs at the VTA is available on the VTA Employment website and from the NEOGOV's Applicant Assistance Line (855) 524-5627. NeoGov Applicant support is available from 8:00AM to 5:00PM (PST) Monday through Friday, excluding holidays.  

Americans with Disabilities Act Accommodations  

The Human Resources Department will make reasonable efforts in the recruitment/examination process to accommodate applicants with disabilities. If you wish to request an accommodation, call the Human Resources Department at (408) 321-5575 or email at Personnel@vta.org. 

 
Application Processing Information  

All related current and past work experience (including VTA experience) must be listed and fully described in the Work Experience section of the application ("See Resume" is not acceptable). Incomplete or improperly completed online applications may be rejected even if you are qualified for the position for which you are applying. It is your responsibility to ensure that the online application reflects the work experience and education needed to meet the requirements for the position you are applying for. Although your resume may have all your experience and education details, please make sure to complete each section of the online application to ensure that your information is accurately captured during our screening process.  

All applications are subject to review as to meeting minimum qualifications at any point in the recruitment process. Passing any step is no guarantee of continuation if it is determined that the applicant does not meet the minimum qualifications as stated in the class specification.  

Candidates found to have exaggerated/falsified their qualifications, experience, training, and/or education may be disqualified at any point in the recruitment process and may be denied future employment with the VTA.  

If selected for the position, candidates will be required to complete a criminal conviction disclosure form. Candidates who successfully become VTA employees, and fail to disclose any of the criminal background information as required may be subject to discipline up to and including discharge.  
 

Eligible Lists typically remain in effect for six (6) months. However, Human Resources may abolish Eligible Lists at any time during the six (6) month period. Human Resources may extend eligible Lists for up to two (2) years. Eligible Lists may be used for more than one recruitment. If you have questions related to an Eligible List you might be on or were on, you should contact Human Resources.  

If you have questions regarding your status as an applicant for this position, please call the Human Resources Department at (408) 321-5575 or email at Personnel@vta.org.  

VTA is committed to providing reasonable accommodations to applicants and employees with disabilities or religious needs, absent undue hardship. 

VTA is an equal employment opportunity employer. VTA does not and will not tolerate discrimination against applicants or employees on the basis of age, ancestry, color, marital status, mental or physical disability, genetic information, national, origin, immigration status, political affiliation, race, religion, creed, sex, gender identity, gender expression, sexual orientation, pregnancy, medical condition, disabled veteran or veteran status, etc. 

The Department of Transportation (DOT) plans, develops, operates, and maintains transportation facilities, services, and related systems which contribute to the livability and economic health of the City. We comprise a team of more than 500 people ready to serve the needs of our residents to improve the efficiency and safety of San José streets. We are an energetic and innovative team that is improving transportation in the nation's 10th largest city, while focusing on safety, sustainability, and active public life! For more information about DOT, visit www.sanjoseca.gov/transportation .

The Department of Transportation (DOT) is seeking to fill 16 full-time Maintenance Assistant positions.

The Maintenance Assistant total salary range is $24.74 to $31.56 hourly or $51,459.20 to $65,644.80 annually . The actual salary shall be determined by the final candidates' qualifications and experience.

The Infrastructure Maintenance Division of DOT is looking to fill 16 full-time vacant positions. These positions perform work in the maintenance and repair of concrete, pavement, sewers, landscaping, traffic signs, and traffic markings. Duties include digging holes, trenches, and ditches. They also operate a wide range of hand, mechanical, and power tools, as well as a variety of light and heavy vehicles, trucks, and equipment relevant to work performed, ensuring compliance with safe working practices. Maintenance crews provide services seven days a week. Individuals in this classification may be required to work alternate work shifts, including grave and swing, weekends, holidays, overtime, and on-call.

More information on the typical duties can be found in the Class Specifications for Maintenance Assistant .

Education: Completion of high school or equivalent (General Education Development [GED] Test or California Proficiency Certificate)

Experience: None.

Acceptable Substitutions: None.

Physical Requirements: Ability to perform the essential physical functions of this position will be determined by a post-offer medical examination conducted by the City of San José Employee Health Services.

Licenses or Certifications: Possession of a valid driver's license in the State of California is required. As a condition of employment in some designated positions, possession of a valid State of California Class A or B driver's license with applicable endorsements may be required. S elected candidates will be required to submit a DMV Release of Driver Record Information form at the time of conditional offer and will be enrolled in the DMV Employer Pull Notice (EPN) Program. Refusal to do so will be considered withdrawing from the recruitment process.

Overview:
Do you have Six (6) years' experience supporting Cyber Security network environments?  Are you ready for you next career opportunity? Consider a career in the water industry!
 
Provide complex and advanced technical assistance in support of managing and implementing Valley Water’s cyber security systems on the Enterprise network and SCADA/ Industrial Control System/ Operational Technology network. Monitor cyber security logs, respond to cyber security incidents, plan design, and implement a variety of complex cyber security systems assists with determining hardware and software systems requirements and specifications; performs a variety of complex technical tasks relative to assigned area of responsibility.
 
Serves as the technical lead on the design and implementation of Valley Water’s most complex and highly integrated Cyber Security systems involving new, unfamiliar, or emerging technologies; to perform the most complex professional level duties in the development, installation, coding, integration, documentation, testing, and maintenance of Cyber Security controls and systems; and to perform a variety of tasks relative to assigned areas of responsibility.

Key Responsibilities include, but are not limited to:
Cyber Security: monitor and maintain security on infrastructure systems including IT security applications and appliances. Example: Microsoft security patching, updating appliance firmware, maintaining Cyber Security definitions, monitoring Anti-Spam solution, monitoring Cyber Security appliances, and recommending modifications to existing Cyber Security hardware, software, and overall security stance. Manages and monitors vulnerability scanning tools and makes recommendations to remediate identified Cyber Security vulnerabilities. Manages Cyber Security audits and makes recommendations to remediate identified threats.
IT infrastructure: ensuring the network perimeter is protected, investigates security breaches and threats and recommends changes to address security issues; manages processes for operating system hardening, and intrusion detection; manages security configurations for server, database, and application systems; conducts electronic discovery searches, manages reporting on security enterprise tools; manages security software server/client updates, supports the Unit Manager in maintaining the Cyber Security program and policies.
IT/OT/ICS operational technology: Monitor network and security appliances for security breaches, updating firmware, maintaining security patches keeping security policies up to date, and maintaining documentation.
 
Ideal Candidate's Background Includes:
Applicants whose experience and background best match the ideal experience, knowledge, skills, abilities, and education are considered ideal candidates for the position. To determine the top candidates, each applicant will be assessed based on the ideal candidate criteria as listed below.

Ideal Experience:

• Six (6) years of increasingly responsible for cyber security scripting and analysis experience in cyber security.
• Risk Management experience.
• Ability to collaborate and communicate effectively with stakeholders.
• Experience researching, planning and implementation of cyber security technologies.
• Experience Monitoring cyber security logs and alerts.
• Experience responding to cyber security incidents on the SCADA/ Industrial Control System/ Operational Technology network.
• Experience working in enterprise environments. 

 Ideal Skills and Abilities:

• Install, maintain, operate, and troubleshoot complex computer systems hardware and software problems, including Firewalls, IPS, Next Generation Endpoint protection, reverse proxies, SIEM and Anti-Spam solutions.
• Develop and maintain Cyber Security policies.
• Breech response and mitigation.
• Assist in user training on computer systems hardware and software.
• Use diagnostic equipment to troubleshoot and diagnose network and communication systems hardware and software problems.
• Interpret and analyze complex user information systems requirements and develop solutions.
• Provide technical support for the implementation and maintenance of various software applications.
• Analyze and assess the technological needs of Valley Water departments.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Utilizing Cyber Security Systems in a SCADA/ Industrial Control System/ Operational Technology network without impacting operations.

Ideal Knowledge:

• Principles and practices of computer science and information systems.
• Principles and practices of enterprise and cloud Cyber Security
• Knowledge of securing critical infrastructure for Supervisory Control and Data Acquisition (SCADA) / Industrial Control System/ Operational Technology environments.
• Operational characteristics of computer hardware and software; and/or audio-visual systems.
• Principles and practices of computer, network systems hardware, and software troubleshooting.
• Operational characteristics of various computer hardware, software applications, and computer operating systems.
• Operational characteristics of computer and network operating systems.
• Operational characteristics of local and wide area networks.
• Principles, practices, and responsibilities involved in leading the work of assigned staff.
• Best practices for office procedures, methods, and equipment.
• Common desktop applications and software as well as specialized software related to the work.

Ideal Training and Education:

• Equivalent to a Bachelor's degree from an accredited college or university with major course work in computer science, information systems or a related field.

Substitution:

• Directly related experience may be substituted for the college requirement on the basis of one and one-half years of experience for one year of education to a maximum of four years.