Search Jobs

Located in Middletown, CA!

 

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

 

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

 

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

 

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

 

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

 

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

 

 

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

 

 

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

 

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

 

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

 

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

 

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

 

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

  

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

 

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

 

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

THE POSITION

The City of Rocklin is looking for two Maintenance Workers to assist in the Parks Division of the Parks and Recreation Department. The Maintenance Worker is a temporary position and incumbents work on an as-needed basis, not to exceed 28 hours per week and up to 999 hours per fiscal year. Temporary employment does not provide any guarantee of continued employment and the City of Rocklin may end the assignment at any time. Temporary employees are not eligible for any other benefits except where required by law, and there is no guarantee of future permanent employment.

An example of duties are:

• Performs flood control measures by clearing creeks of obstructions, keeping drains clean and clear, and preparing sandbags in case of emergency.
• Performs crack sealing of asphalt, and backfilling trenches and excavations on City streets; performs repair, maintenance, and construction of sidewalks, curbs, and gutters.
• Removes concrete, builds forms, pours concrete, and performs other concrete work around City buildings as required.
• Empties trash cans, picks up and removes debris, litter, and trash from parks, athletic fields, trails, and landscaped areas throughout the City; removes graffiti and other unwanted markings from City-owned property.
• Plants, mows, prunes, and maintains turf, trees, shrubs, and plants; clears sites of weeds.
• Performs construction and repair of landscapes and other park facilities such as installing and maintaining signs, installing park structures, and installing and maintaining fences.
• Paints or stains and pressure washes and cleans park amenities and fencing.
• May apply pesticide, herbicide and other pest management treatments to vegetation and landscaped areas.
• Makes minor adjustments on service equipment; maintains tools and equipment in working order.
• Operates trucks, trailers, and other automotive equipment as required.
• Maintains logs of daily activities.
• Performs related duties as assigned.

MINIMUM REQUIREMENTS

Equivalent to graduation from high school
AND
Three (3) months of experience as a laborer in construction, maintenance, or landscaping work 

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

San Francisco International Airport (SFO) is hiring a Sheet Metal worker!

Role description

Under general supervision , cuts, forms, fabricates and installs various gauge sheet metal fixtures, systems, reinforcements and structures, and repairs and/or replaces damaged sheet metal fittings or structures; and performs related duties as required. Apply now and have your career take off at SFO. See official job posting for further details.

Nature of work requires: physical effort and dexterity in the use of the fingers, limbs and body; exposure to working conditions where moderately serious injuries may occur.

The essential functions of the class are, but are not limited to:

1. Determines, from work orders or blueprints, work to be done and the type, cut and material needed; obtains metal from stock or on requisition and measures and marks it for cutting and forming.

2. Cuts out sheet metal parts using hand or power tools, bends and forms pieces and fastens parts together with joining equipment.

3. Erects scaffolds for work to be done in high locations.

4. Lifts and sets sheet metal parts and objects in place and connects with other units.

5. Uses solder to join sheet metal parts and products.

How to qualify

Education:
Requires completion of a recognized sheet metal worker’s apprenticeship program (in the Building Trades); and

Experience:
Three (3) years of journeyman level sheet metal working experience.

License and Certification:
Possession of a valid California driver license.

Substitution:

Additional qualifying journeyman-level sheet metal working experience may be substituted for the required sheet metal worker’s apprenticeship program on a year-for-year basis.

Applicants must meet the minimum qualification by the final filing date unless otherwise noted.

One year full-time employment is equivalent to 2,000 hours (2,000 hours of qualifying work experience is based on a 40 hour work week). Any overtime hours that you work above 40 hours per week are not included in the calculation to determine full-time employment.

 

The City of Pacifica is currently hiring part-time Child Care Aides and Child Care Associate Teachers to join our team!

Are you 18 years of age or older?  

Are you available to work Monday through Friday with varying shifts?

Do you have a passion for working with children?

If so, apply today!

 

THE OPPORTUNITY

The City of Pacifica is a beautiful coastal community, just south of San Francisco with an exciting opportunity for Child Care Professionals. Currently, the City of Pacifica Parks, Beaches and Recreation Department is recruiting for Child Care Aides and Child Care Associate Teachers to join our Child Care Team! The level at which an individual is hired will be dependent on the applicant's qualifications, work experience and education.

At the City of Pacifica, we are an equal opportunity employer and value diversity. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. To us, equal opportunity employment is not just about compliance, it’s about who you are, how you can help our City and who you want to be. We are committed to creating an inclusive environment for all employees and residents.

 

Salary

Child Care Aide: $16.50 - $19.50 per hour, part time, non-benefited, typically limited to 1,000 hours per year.  

Child Care Associate Teacher: $20.00 - $25.50 per hour, part time, non-benefited, typically limited to 1,000 hours per year.

 

CHILD CARE AIDE

This position will work directly with a Child Care Site Coordinator or Lead Teacher at varying pre-school or K-6/ K-8 school sites based on program needs. The Child Care Aide is responsible for leading activities and supervising small groups of children in State-funded Title V programs.

 

BASIC EXAMPLE OF DUTIES

Duties may include, but are not limited to the following:

• Assisting staff in implementing youth recreation activities, sports, arts, crafts, and other age-appropriate activities
• Maintaining discipline, site safety and observe the overall physical and emotional well-being of the program participants
• Interacting with parents, participants, school district and city employees in a professional manner
• Attending staff meetings and in-service trainings as required

The duties described in this job announcement are intended only as illustrations of the basic types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. Job description is currently under review.

 

CHILD CARE ASSOCIATE TEACHER

This position is responsible for leading activities and supervision of small groups of children at a State-funded Title V program. 

 

BASIC EXAMPLE OF DUTIES

Duties may include, but are not limited to the following:

• Assisting staff in implementing youth recreation activities, sports, arts, crafts, and other age-appropriate activities.
• Maintaining discipline, site safety and observe the overall physical and emotional well-being of the program participants.
• Interacting with parents, participants, school district and city employees in a professional manner.
• Assisting students in completing homework in a variety of subjects.
• Attending staff meetings and in-service training as required.

The duties described in this job announcement are intended only as illustrations of the basic types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position.   Job description is currently under review.

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Stationary Engineer SF Municipal Transportation Agency - (7334 TPV)

Published: July 31, 2023

Accepting applications until: August 05, 2023

Contact:

Lisette Del Pino - Lisette.DelPino@sfmta.com

 

Department: Municipal Transportation Agency
Job class: 7334-Stationary Engineer
Salary range: $119,184.00 - $119,184.00
Role type: Permanent Civil Service What does this mean?
Hours: Full-time
Exam type: Contact us for more information
Rule: Contact us for more information
List type: Contact us for more information

 

About:

The SFMTA, a department of the City and County of San Francisco, oversees Muni (the historic Municipal Railway), parking and traffic, bicycling, walking and taxis. Over one million people get around San Francisco and rely on us to ensure safe and reliable travel.

Our Vision: Excellent transportation choices for San Francisco.

Our Mission: We connect San Francisco through a safe, equitable, and sustainable transportation system.

Appointment Type: Temporary Provisional. This is not a permanent appointment. A provisional appointee must participate and be successful in a Civil Service examination for this classification and be selected through an open competitive process in order to be considered for permanent appointment. Provisional appointments may not exceed three (3) years.

Application Opening: July 5, 2023

Application Filing Deadline: May close at any time but not prior to August 5, 2023

Annual Salary: $119,184.00 + *shift premium pay when applicable

Recruitment ID: TPV-7334-137134

Role description

Under general supervision, operates, maintains, troubleshoots, and repairs a wide variety of pumping, heating, ventilating, air conditioning, refrigeration and auxiliary plant machinery and equipment in a large complex or multi-faceted facility. Ensures that all equipment, machinery and systems are functioning normally and safely, and complies with all applicable safety rules and regulations. The incumbent will either be assigned to work in the world class historic Cable Car Barn or the Mechanical Systems Program which manages SFMTA’s subway system, this includes the recently completed Central Subway extension project.

*Different shifts at the Mechanical Systems Program (MSP), various Subway Stations, and Cable Car (CC) Building, at 1201 Mason Street, San Francisco, CA 94108. Initial trainings may occur in shifts different than those listed below:

1. Transit CC (Grave, SUN-THU, 21:00-05:00 / 9:00pm-5:00am)
2. Transit CC (Grave, THU-MON, 21:00-05:00 / 9:00pm-5:00am)
3. Transit MSP (Grave, MON-FRI, 22:00-06:00 / 10:00pm-6:00am)
4. Transit CC (Day, FRI-TUE, 09:00-17:00 / 9:00am-5:00pm)
5. Transit MSP (Grave, SAT-WED, 22:00-06:00 / 10:00pm-6:00am)

Essential functions of the class include:

• Operates, maintains and repairs a wide variety of pumping, heating, ventilating, air conditioning, refrigeration, and power generating equipment in a large complex or multi-faceted facility to ensure the safe, correct and efficient functioning of the facility and equipment may be required to operate computerized building management systems, preventative or predictive maintenance computer systems or Computerized Data Gathering System (SCADA).
• Inspects and tests: machinery and equipment for safe, efficient and proper operation by visual and audio inspection during walk-throughs and by standard monitoring; fire prevention equipment to ensure safe and proper functionality; water storage and multiple distribution systems, high pressure zones, wood and steel storage tanks, pumps and relief valves, and samples of water.
• Makes entries and keeps records on shift operation by taking and entering gauge readings and accurate water laboratory analysis readings and temperatures on operating log sheets or into a computer data system to ensure preventative maintenance and equipment history; and changes charts and recordings accordingly.
• Receives, records and stores large amounts of treatment chemicals and may handle hazardous chemicals in confined or enclosed areas; must be capable of safely and properly handling chemical spills; may also include handling and treatment of industrial or hazardous waste.
• Contacts, communicates and is required to deal with contractors, building tenants and/or the general public in order to be able to discharge assigned duties.
• Maintains keys, communications equipment, and security (in the absence of Security Personnel), in order to ensure the security of a plant and buildings and grounds, including public safety. As part of an emergency response team, recognizes, evaluates, and responds to potentially hazardous situations.
• Performs control tests on water samples to determine chlorine and fluoride residual, pH, alkalinity, turbidity, color, saturation index and flocculation factors; under supervision, conducts water analysis and regulates treatment chemical dosages to maintain water quality in filtration plant, distribution system, or other large complex facility may also be required to perform water analysis on water/wastewater as required by the State of California; performs boiler water and cooling tower chemical tests, including pH, alkalinity TDS, etc., to monitor and control growth of organisms in water.
• Performs related duties as required.

Nature of work
Involves physical effort in the repair and maintenance of machinery and equipment; the ability to lift heavy objects; exposure to working conditions where minor abrasions, bruises, and burns may occur; occasional uncomfortable work inside closed and dirty spaces; exposure to potential uncomfortable weather conditions and traffic conditions; and requires physical stamina to stand, stoop, bend and climb ladders while working in confined spaces, entryways and tight crawl spaces.  Some positions may also require the ability to operate both automatic and manual automobile transmission as needed. Employees may be required to work rotating shifts, nights, weekends, and holidays, and a shift of up to 12 hours.

How to qualify

MINIMUM QUALIFICATIONS:

1. Four (4) years of verified journey-level stationary engineer experience in the maintenance, repair and operation of a variety of mechanical and electrical pumping, heating, air conditioning, ventilating and related plant machinery used in a government establishment, hospital, industrial, production or commercial building; AND

2. Possession of a valid California Driver’s License; AND

3. Possession at time of hire a Universal Chlorofluorocarbon (CFC) certificate issued by the Federal Environmental Protection Agency.

Substitution: (Any of the following may be substituted for the required experience)

• Completion of a recognized four-year Stationary Engineer apprenticeship program
• Graduation from a recognized four-year Maritime Academy with a degree in engineering or technology
• Possession of at least a 3rd Assistant Marine Engineer's License of any (unrestricted) horsepower

NOTE:
Make sure your application and any attachments to the application submitted at the time of filing are complete and accurate and include details on all experience, education, training and other information that qualifies you for this recruitment.  Failure to submit a complete and accurate application at the time of filing may result in your ineligibility for this recruitment or inability to receive full credit for scoring purposes.  Any new information concerning work experience, education, training and other information that is submitted after the filing deadline may not be used for scoring or considered to determine whether you meet the minimum qualifications. Applications completed improperly may be cause for ineligibility, disqualification or may lead to lower scores.

What else should I know?

VERIFICATION:
Applicants may be required to submit verification of qualifying education and experience at any point during the recruitment and selection process. More information can be found at: https://sfdhr.org/information-about-hiring-process#verification. Falsifying one’s education, training, or work experience or attempted deception on the application may result in disqualification for this and future job opportunities with the City and County of San Francisco.

All work experience, education, training and other information substantiating how you meet the minimum qualifications must be included on your application by the filing deadline. Information submitted after the filing deadline will not be considered in determining whether you meet the minimum qualifications.

Resumes will not be accepted in lieu of a completed City and County of San Francisco application.

Applications completed improperly may be cause for ineligibility, disqualification or may lead to lower scores.

SELECTION PROCEDURE:
The selection process will include evaluation of applications in relation to minimum requirements. Depending on the number of applicants, the Department may establish and implement additional screening mechanisms to comparatively evaluate qualifications of candidates. If this becomes necessary, only those applicants whose qualifications most closely meet the needs of the Department will be invited for an interview.

Applicants who meet the minimum qualifications are not guaranteed to advance through all of the steps in the selection process.

Medical Examination/Drug Testing:
Candidates who are being considered for appointment for positions may be required to pass a medical examination. Candidates who cannot meet the medical requirement will be placed under waiver until this requirement is met. The medical examination will be administered only to those applicants who are being considered for appointment.

The San Francisco Municipal Transportation Agency (SFMTA) has determined that Class 7334 Stationary Engineer is a “safety-sensitive” position, under regulations issued by the Federal Transit Administration (49 CFR Part 655). Federal law requires that all transit employees who perform safety-sensitive functions be subject to random, post-accident, reasonable suspicion, return-to-duty and follow-up drug and alcohol testing. All applicants for Safety-Sensitive positions shall undergo urine drug testing prior to employment and within 90 days prior to performing Safety-Sensitive functions for the first time. Receipt by the SFMTA of a negative test result is required prior to the employee being placed on the payroll. A positive, adulterated, negative dilute or substituted test will result in a decision not to hire, and the applicant’s name will be removed from the list of eligibles for Safety-Sensitive positions. The SFMTA will not consider hiring any person who tested positive, adulterated, substituted or refused to submit to testing for a minimum of two years following the positive test.

In addition, each applicant who has worked for a Department of Transportation (DOT)-regulated employer(s) within the last two years will be required to sign a consent form, prior to appointment, authorizing SFMTA to obtain information from his/her prior employers concerning his/her drug and alcohol test history. Each applicant will also be required to provide SFMTA with information regarding whether, during the last two years, the applicant tested positive or refused to test on any pre-employment drug or alcohol test administered by an employer to which the applicant applied for, but did not obtain, safety-sensitive transportation work covered by DOT drug and alcohol testing rules. SFMTA will not hire any applicant for a safety-sensitive position who fails to provide this information or fails to provide written consent for the release of information from prior employers.

Additional Information Regarding Employment with the City and County of San Francisco:

• Information About The Hiring Process
• Conviction History
• Employee Benefits Overview  
• Equal Employment Opportunity 
• Disaster Service Worker
• ADA Accommodation
• Right to Work
• Copies of Application Documents
• Diversity Statement
• SFMTA Employee Wellness Program

HOW TO APPLY
Applications for City and County of San Francisco jobs are only accepted through an online process. Visit https://careers.smartrecruiters.com/CityAndCountyOfSanFrancisco1/ and begin the application process.
• Select the “I’m Interested” button and follow instructions on the screen

Applicants may be contacted by email about this recruitment and, therefore, it is their responsibility to ensure that their registered email address is accurate and kept up-to-date. Also, applicants must ensure that email from CCSF is not blocked on their computer by a spam filter. To prevent blocking, applicants should set up their email to accept CCSF mail from the following addresses (@sfgov.org, @sfdpw.org, @sfport.com, @flysfo.com, @sfwater.org, @sfdph.org, @asianart.org, @sfmta.com, @sfpl.org, @dcyf.org, @first5sf.org, @famsf.org, @ccsf.edu, @smartalerts.info, and @smartrecruiters.com).

Applicants will receive a confirmation email that their online application has been received in response to every announcement for which they file. Applicants should retain this confirmation email for their records. Failure to receive this email means that the online application was not submitted or received..

Exam Analyst Information: If you have any questions regarding this recruitment or application process, please contact the exam analyst at Lisette Del Pino and Lisette.delpino@sfmta.com.

Terms of Announcement:
Applicants must be guided solely by the provisions of this announcement, including requirements, time periods and other particulars, except when superseded by federal, state or local laws, rules or regulations. Clerical errors may be corrected by posting the correction on the Department of Human Resources website at https://careers.smartrecruiters.com/CityAndCountyOfSanFrancisco

CONDITION OF EMPLOYMENT:  All City and County of San Francisco employees are required to be fully vaccinated against COVID-19 as a condition of employment. Someone is fully vaccinated when 14 days have passed since they received the final dose of a two-shot vaccine or a dose of a one-shot vaccine. Any new hire must present proof of full vaccination status to be appointed. Any new hire who will be routinely assigned or occasionally enter High-Risk Settings, must provide proof of having received a COVID-19 booster vaccine by March 1, 2022, or once eligible.

The City and County of San Francisco encourages women, minorities and persons with disabilities to apply. Applicants will be considered regardless of their sex, race, age, religion, color, national origin, ancestry, physical disability, mental disability, medical condition (associated with cancer, a history of cancer, or genetic characteristics), HIV/AIDS status, genetic information, marital status, sexual orientation, gender, gender identity, gender expression, military and veteran status, or other protected category under the law.

The City of Menlo Park is currently accepting applications for Child Care Teacher I/II.   

These positions are part-time (20 hours a week) and provide a flexible work schedule. We are looking for candidates that enjoy teaching & working with preschool and school aged children. The working hours are Monday through Friday.

The City of Redwood City’s invites you to apply for the position of Pre-School Teacher (Bilingual Preferred).

• Please click on the job announcement file below to review the recruitment flyer.
• A complete application is required.
• Applications will be reviewed continuously as they are received. Interested individuals are encouraged to apply as soon as possible.