Search Jobs

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team allows you to make a significant impact in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

The department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Regulatory Compliance and Policy Division.

The ideal candidate is a skilled and highly motivated individual, with creative problem-solving skills, the ability to learn quickly, and the desire to work both independently and collaboratively. Good judgment, initiative, and cooperation with other staff and outside stakeholders are assets to this position. Under general direction of the Deputy Director, this position will be responsible for supporting the division's engagement in state regulatory affairs to protect and advance San José policy, business, and community interests.

Typical duties of this position may include, but are not limited to:
• Monitor, review, interpret, and explain to a variety of audiences regulatory proposals and other policy issues with an eye toward impact on SJCE and its customers.
• Respond to compliance and data requests by gathering relevant data, drafting reports, and receiving approvals within designated timeframes.
• Support the preparation of comments, position papers, testimony, and the like related to a variety of technical regulatory proceedings impacting SJCE energy procurement, energy management, and electric rates.
• Work independently and with stakeholders to influence state policy.
• Build and maintain stakeholder relationships including non-profit, business, and government entities, and where appropriate build regional and statewide coalitions to support the interests of the department.
• Work closely with technical experts and external regulatory counsel to develop effective and persuasive communications before state agencies as required.
• Represent SJCE in work with other CCAs and with SJCE's state trade association
• Manage a portfolio of regulatory proceedings and/or compliance reporting, including tracking issues, analyzing potential impacts, engaging with stakeholders, and communicating with other internal divisions.
• Perform other related duties as required.

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, the Plant Operator II during an assigned shift is responsible for operation of the wastewater treatment plant and for maintaining a variety of machinery and equipment.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digesters, centrifuge, chlorinators and valves to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and control panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases, and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records and shift logs; assists in the training of other plant operators, makes operating decisions in the absence of supervisory personnel; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electrical motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in the water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant, make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: Two years experience in water quality control plant operations. Specialized training may be substituted for 6 months experience.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, standing, bending, climbing, and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade II Operator's Certificate and possession of a valid Class C California Driver's License (including acceptable driving record).

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, operates and maintains equipment and facilities of the water quality control system, and performs other related work as required.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digester, centrifuge chlorinators to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and controls panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electric motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in a water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant; make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: One year of experience in mechanical maintenance and/or water quality control plant operations.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, bending, climbing and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade I Operator's Certificate; possession of a valid Class C California Driver's License (including acceptable driving record).

The City of Berkeley invites you to apply for the position of Weighmaster in the Zero Waste Division of the Public Works Department! Working in the scale house at the solid waste transfer station, the Weighmaster is responsible for assessing incoming loads and providing direction to customers.

In this role, you will weigh vehicles entering and leaving the transfer station; estimate volumes of small loads and assess contents; collect established fees for dumping; provide information and direct customers; and use personal computers for data collection, computation, reconciliation, record keeping and reporting. 

MINIMUM QUALIFICATIONS

A typical way of gaining the knowledge, skills, and abilities for this position is: 
Equivalent to completion of high school and either three (3) years of solid waste collection and disposal experience, or three (3) years of general office or accounting support work experience. Prior experience in refuse collection and/or experience in handling of hazardous materials is desirable.

Other requirements include:
Must be bondable and able to work early morning, evening, holiday and weekend shifts in a dusty, windy environment without restrictions. Within a six (6) month probationary period must successfully complete four (4) weeks of full-time equivalent on-the-job training to prepare the employee to assume the full range of Weighmaster duties, as certified by senior supervisory staff.

Successful completion of classes in Customer Service Dispute/Conflict Resolution is desirable.

APPLICATION PROCESS

Applications must be received by 5:00 PM Pacific on June 24, 2024, and must include a completed application. Please note that resumes are not a substitute for a completed application.  

Applications are available in alternative formats (audio-format, braille, large print, electronic text, etc.) upon request to ada@berkeleyca.gov. Please allow 10 days for production of the material in an alternative format. 

A Dance Instructor (Program Specialist) will plan, prepare and instruct recreation activities. Activities may include art, cooking, dance, pre-school program and other program areas. Programs are designed for children ages 4-17 (primarily 5-12) years of age.

Dance programs may include ballet, tap, jazz, hip-hop, ballroom, folkloric, salsa, and rhythmic international styles.

EXAMPLES OF DUTIES (These duties are a general description and are not all inclusive.)

• Develop and submit lesson plans including class content and material needs.
• Lead organized activities to develop and strengthen youth academic, recreational, and social skills.
• Plan lessons and activities so they are appropriate to students with various abilities.
• Ability to requisition supplies and/or purchasing program supplies within City guidelines
• Evaluate and provide constructive feedback on the activities, camps and events
• Conduct creative and safe class meetings; instruct students on the safe and proper use of supplies, tools, and equipment
• Participate in cleaning and maintaining the facilities and equipment
• Interact professionally and appropriately with parents, students and staff
• Communicate with supervisor regarding classroom needs
• Attend staff meetings and trainings
• Perform other duties as assigned

SUPERVISION EXERCISED AND RECEIVED

General supervision is provided by a program coordinator or Recreation Supervisor. The Program Specialist may supervise a part-time aide and/or "counselor in training" in a classroom environment in daily activities.

MINIMUM QUALIFICATIONS

• Must be a minimum of eighteen (18) years of age
• Different program areas will have different skills and knowledge requirements for the position; check with Recreation Supervisor. (For example: 6 ECE unites required for pre-school instructor)
• One school year teaching experience
• At least one year's experience working with children in an academic setting
• Must be willing and able to work days, nights, weekends, and holidays as required

REQUIREMENTS FOR EMPLOYMENT

• Must be able to handle sensitive and/or stressful situations or information with tact, discretion and significant awareness of confidentiality
• Must effectively communicate with adults and children from a variety of cultural backgrounds
• Willingness to comply with suspected child abuse reporting (11166.5 PC)
• Employees are required to be certified in Adult/Child CPR & First Aid from American Red Cross, American Heart Association or supervisor approved equivalent. Employees must be certified within 30 days of hire date or prior to the first day of work, whichever occurs earlier.
• Fingerprinting and TB test are required
• Must submit verification of legal right to work in the United States as a condition of employment

SELECTION PROCESS

Qualified application will be evaluated on the basis of related experience and quality of presentation.

The most highly qualified applicants will be invited to an oral interview. Applicant evaluations may include a written and physical test. Satisfactory candidates will be placed on an eligibility list. Placements are anticipated immediately after the list is established. Some placements may be assigned to emphasize public education as the City's needs require.

Some positions may require a health evaluation.

APPLICATION PROCESS

To be considered for this position, apply online by submitting a completed City application and resume through our online application system: https://fremont.workbrightats.com/jobs/

Reasonable Accommodation: The Recreation Services Division will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise us of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4347 or emailing recjobs@fremont.gov.

THE CITY OF FREMONT IS AN EQUAL OPPORTUNITY EMPLOYER.

WE DO NOT DISCRIMINATE ON ANY BASIS.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The Recreation Specialist is a unique position that is primarily responsible for specific projects or long term projects requiring relevant knowledge and expertise.

EXAMPLES OF DUTIES (This is a general description of duties and is not all-inclusive)

• Coordinate all aspects of a project
• Set up and maintain project files or computer databases as required
• Provide regular project updates including written reports to project leader in a timely manner
• May work independently or in a team environment depending on project requirements
• Provide expertise and support to project leader
• Enforce City policies and procedures
• May be required variable hours including evenings and weekends
• Perform other duties as assigned

SUPERVISION EXERCISED AND RECEIVED

General supervision is provided by the Recreation Supervisor.

MINIMUM QUALIFICATIONS

• Must be at least 18 years of age
• Relevant technical skill, education, experience or expertise
• Ability to establish and maintain productive relations and positive attitude toward others
• Excellent written and verbal skills
• Excellent organizational and supervisory skills, be resourceful, flexible and able to work both alone or as a team member
• Must be reliable and be able to provide transportation

REQUIREMENTS FOR EMPLOYMENT

• Must be able to handle sensitive and/or stressful situations or information with tact, discretion and significant awareness of confidentiality
• Must effectively communicate with adults and children from a variety of cultural backgrounds
• Willingness to comply with suspected child abuse reporting (11166.5 PC)
• Employees are required to be certified in Adult/Child CPR & First Aid from American Red Cross, American Heart Association or supervisor approved equivalent. Employees must be certified within 30 days of hire date or prior to the first day of work, whichever occurs earlier.
• Fingerprinting and TB test are required
• Must submit verification of legal right to work in the United States as a condition of employment

SELECTION PROCESS

Qualified applications will be evaluated on the basis of related experience and quality of presentation.

The most highly qualified applicants will be invited to an oral interview. Applicant evaluations may include a written and physical test. Satisfactory candidates will be placed on an eligibility list. Placements are anticipated immediately after the list is established. Some placements may be assigned to emphasize public education as the City's needs require.

Some positions may require a health evaluation.

APPLICATION PROCESS

To be considered for this position, apply online by submitting a completed City application and resume through our on line application system: https://fremont.workbrightats.com/jobs/

Reasonable Accommodation: The Recreation Services Division will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise us of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4347 or emailing recjobs@fremont.gov.

THE CITY OF FREMONT IS AN EQUAL OPPORTUNITY EMPLOYER.

WE DO NOT DISCRIMINATE ON ANY BASIS.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The City of Lincoln is accepting applications for the position of Refuse Truck Driver II in the Solid Waste division of the Public Works department. Under general supervision, this position performs a variety of tasks in the collection of residential, commercial and industrial solid waste refuse; drive and operate refuse collection vehicles; organize, assign and review the work of others and perform other related duties as required.  

DISTINGUISHING CHARACTERISTICS

Refuse Truck Driver II

This is a journey level class and is distinguished from the Maintenance Worker I classification by the ability to perform the full range of duties assigned with only occasional instruction or assistance as unusual or unique situations arise. This class is distinguished from the Senior Refuse Truck Diver in that the latter provides technical and functional supervision over assigned staff or division programs and responsibilities.

SUPERVISION RECEIVED/EXERCISED

Receives general supervision from a Public Works Supervisor. May receive technical and functional supervision from a Senior Refuse Truck Driver.

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Drives and operates a variety of collection vehicles and equipment including one or two-person-staffed refuse collection truck, front, rear and side loaders in the collection and transportation of residential and commercial refuse; responds to afterhours call-outs if assigned.
• Maintains assigned truck by regular cleaning and washing, including inspecting for mechanical or other operating problems; reports mechanical or related problems for maintenance; may perform minor maintenance as appropriate.
• Operates hydraulic/mechanical controls to load, compress, and dump refuse; collects and disposes of debris on assigned route; transports refuse to/unload at appropriate landfill sites and/or sewage treatment plant.
• Assists with battery sorting, electronic waste collection, bin repair or delivery, cardboard removal, illegal dumping cleanup, and any other related solid waste program or assignment.
• Completes and posts notification tags on containers, bins and dumpsters for unacceptable contents for refuse collection.
• Prepares, maintains and submits records, reports and forms including time records, equipment and maintenance records, and route maps and logs.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff and the public.
• Performs other related duties as assigned.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of:  Methods, practices and techniques of solid waste and refuse collection and disposal; practices, techniques and materials used in the collection and disposal of solid waste refuse; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; Principles and practices of lead supervision, training, and performance evaluation, including safety practices and related record-keeping; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to:  Safe, effective, defensive and attentive driving, along with experience using a variety of solid waste and refuse collection vehicles, equipment, tools and materials. 

Ability to:  Perform solid waste refuse collection and disposal; drive and operate solid waste and refuse collection trucks; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of solid waste and refuse collection equipment, vehicles and tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to afterhours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; develop and coordinate collection route schedules, including identification of non-routine special routes/equipment needs related to special events/projects; inspect trucks for maintenance/replacement recommendations; act as a lead worker and perform advanced journey level solid waste refuse collection work related to area of assignment; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.