Search Jobs

Located in Middletown, CA!

 

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

 

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

 

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

 

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

 

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

 

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

 

 

EOE

The City of Dixon is looking to fill a position for a Streets & Streetscapes Maintenance Supervisor in the Public Works Department. This individual will plan, organize, monitor and supervise the work of maintenance personnel as assigned to the Public Works Department; and will perform a variety of technical tasks relative to Street and Streetscapes Maintenance.

This class is a full, first-line supervisory level in the maintenance series. Incumbents have responsibility for resolving employee complaints, ensuring that departmental rules and regulations are followed, and preparing employee performance evaluations. Receives general direction from the Public Works Director or his/her designee. Exercises direct supervision over maintenance personnel assigned to the Public Works Department.

Future Salary COLA:  4% increase (eff July 2024)

Exam Process: A limited number of candidates whose applications indicate that they, among those competing, are better qualified in terms of related education, training and experience will be invited to participate in a written exam and an interview process (weighted 100%). The most qualified candidates from this process will be placed on an employment eligibility list. Note: the examination process may be changed as deemed necessary.

Employment Processing: Those selected will be subject to pre-employment drug testing, physical evaluation and fingerprinting. In accordance with Federal law, an employee must provide proof of identity and legal right to work in the United States.

Veteran’s Preference Points: Veteran’s Preference points will be applied. A copy of the DD214 form must be filed as a PDF attachment at the time of application. 

The City of Dixon is an EQUAL OPPORTUNITY EMPLOYER. Reasonable Accommodation in the application, examination and selection process will be made upon request by calling (707) 678-7000.

Please do not reply to emails from CalOpps during this process at any time as this correspondence does not come back to our agency.

The Department of Public Works is seeking an Associate Civil Engineer in the Road Operations Unit of the Road Services Division.

 

Associate Civil Engineer is the registered journey level classification in the engineering series. At this level, a high degree of technical expertise and some periodic lead responsibilities are required. Under general supervision, incumbents may perform a variety of professional engineering tasks in such areas as planning, design, traffic engineering & operations and construction inspection of roads, park trails, bridges, drainage, sanitary sewer systems, water supply, and other public works projects. Associate Civil Engineers may provide lead direction to other staff in completing projects of greater difficulty and complexity. Incumbents will be required to perform field work in support of the planning, design, and/or construction inspection of public works projects.

 

The ideal candidate for this position will be:

• Technically knowledgeable and experienced in the principles and practices of civil engineering, public works design, construction, and/or maintenance.
• An effective communicator, both orally and in writing; able to represent the County in meetings and presentations to various groups including property owners, community groups, regulatory and other governmental agencies, and the public.
• Customer-focused and interpersonally effective in dealing with staff, engineers, contractors, and the public, and in coordinating with law enforcement agencies, emergency responders, and other agencies when necessary.
• Able to provide information to the public and other governmental agencies, in person or over the telephone, regarding County procedures and regulations, facility locations, plan requirements, and property ownership, which may require the interpretation of policies and procedures.
• Able to perform development plan reviews and prepare plan review comments.
• Able to analyze and evaluate alternatives, make sound recommendations, and prepare concise and effective technical staff reports.
• Accountable and able to schedule and carry through with assignments with independence.
• Experienced with designing public works projects such as road improvements, drainage and flood control improvements, parks facilities, water treatment and distribution systems, and sanitary sewer systems.
• Experienced with computer aided drafting software such as AutoCAD/Civil3D or similar.

 

Examples Of Duties

Duties for these positions may include, but are not limited to:

• Serving as resident engineer on routine construction projects.
• Preparing designs, plans, and specifications for routine projects.
• Assisting in drafting and preparing instructions for bidders, proposals, affidavits, bonds, specifications, change orders, and other documents and reports involved in the construction of engineering projects.
• Gathering, compiling, and computing data using engineering, drafting, and calculating instruments and techniques to prepare designs, plans, estimates, technical reports, and specifications for the construction, alterations, maintenance, and operations of a variety of engineering projects.
• Supervising subordinate personnel in a variety of capacities.
• Inspecting construction projects for conformance with specifications, safety standards, and federal, state, and local regulations.
• Conducting economic cost and quantity estimates for assigned projects.
• Performing related duties as assigned.

 

Qualifications

Licensure/Certification: Candidates for Associate Civil Engineer must possess a valid Certificate of Registration as a Professional Civil Engineer in the State of California at the time of hire. Some positions require possession of a class C California driver license or equivalent.

 

Education and Experience: Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying. A typical way to qualify is:

• Possession of a valid Certificate of Registration as a Professional Civil Engineer in the State of California at the time of hire,
• Two years of professional civil engineering experience which has included field and office work in the planning, design, construction, and maintenance of a variety of civil engineering projects.

 

Knowledge of:

• Civil engineering practices and procedures including design and construction methods and techniques.
• Strength and properties and uses of materials and hydraulics.
• Civil engineering design and drafting principles.
• Surveying methods.
• Methods, materials and equipment used in civil engineering projects.
• Methods, materials, tools and equipment used in civil engineering construction work.
• Construction inspection techniques.
• Hydraulics and strength of materials.
• Principles of engineering as they apply to public works projects.
• Engineering mathematics and their application to engineering problems.

 

Skill/Ability to:

• Inspect civil engineering work in progress.
• Prepare clear, concise correspondence and reports.
• Comply with safety procedures.
• Supervise subordinate staff.
• Perform engineering calculations and routine design work.
• Solve surveying problems.
• Prepare neat and accurate maps, drawings, notes and reports.
• Operate survey equipment.

 

IMPORTANT: Applications for this position will only be accepted online. If you are currently on the County's website, you may click the ''Apply'' button. If you are not on the County's website, please go to https://jobs.smcgov.org to apply. Online applications must be received by the Human Resources Department before midnight on the final filing date.

 

~ TENTATIVE RECRUITMENT SCHEDULE ~

Final Filing Date: June 12, 2024

Application Screening: June 17-18, 2024

Civil Service Panel Interviews: June 27-28, 2024

THE POSITION

Perform professional civil engineering work in the planning, design, technical investigation, and construction of projects in public works, transportation, capital improvements, and structural engineering. An example of duties include:

• Participates in the preparation of plans and specifications for the construction of streets, storm drains, street lighting, traffic signals, buildings and related public works and City building projects; researches project design requirements; performs calculations and prepares estimates of material costs and time considerations.
• Researches publications and industry information sources.
• Develops and revises design and construction standards.
• Participates in the implementation of the City’s traffic and transportation engineering programs; prepares and revises plans and specifications for traffic related projects; prepares special studies and reports and coordinates major projects.
• Investigates field problems affecting property owners, contractors, and maintenance operations.
• Prepares estimates and feasibility reports for new or modified services and structures.
• Administers contracts and may assist with inspection services and project management for construction and maintenance projects.
• Participates in the plan check, review and processing of plans for private developments affecting streets, sewers, drains and related public works facilities and ensures that they meet all City imposed requirements.
• Prepares special engineering studies and reports.
• Coordinates planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies.
• Attends various staff and regional technical advisory meetings.
• Provides technical and professional assistance/support to other City departments and divisions, Planning Commission, and City Council as necessary.
• Performs other related duties as assigned.

MINIMUM QUALIFICATIONS

Equivalent to a Bachelor’s degree with major coursework in civil engineering or a closely related field;

OR

Possession of a current Engineer-in-Training Certificate, issued by the California State Board of Registration for Professional Engineers, and one (1) year of professional civil engineering experience.

License Requirements:

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

 

 

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

 

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

 

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

 

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The City of Burlingame is accepting applications for the position of Accountant I/II

 

Our diverse family of employees welcomes you to apply. We are a small city that gets a lot done, and each member of our team is vital to our success as an organization.

We recently asked our employees what they enjoyed most about working for the City of Burlingame, and their responses fell into five general categories:

• Colleagues
• Community
• Location
• The Work
• The Benefits

Browse the Burlingame Welcome Brochure for more information about why employees love  working here or view our City of Burlingame is a Great Place to Work Video: 

Welcome Brochure 

City of Burlingame is a Great Place to Work Video

 

The City of Belmont Public Works Department is recruiting for the position of Senior Civil Engineer. First review of applications will be May 28, 2024 with interviews scheduled for May 30 and 31, 2024.

Why join our Team?

It's exciting to be part of the Belmont Public Works team.  We are an energetic, collaborative group that share a passion for serving our community and improving the place we live and work.  We will provide you with a wide rage of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Check out the Public Works homepage for more information: Public Works - City of Belmont

What You'll Do

The Public Works Department is responsible for the City's major capital projects and infrastructure including streets, sidewalks, streetlights, traffic signals, sewer and storm conveyance systems, and pump stations.  The Department is also responsible for the efficient management of the City's traffic operations and review of right-of-way impacts associated with private developments.

Transportation is and continues to be of importance to our Department and the community.  Traffic congestion plagues many of the peninsula cities.  Belmont has taken a proactive approach by continuously looking for transportation improvements, such as roundabout design, multimodal enhancements, and an adaptive signal operation system on our main East-West connection, Ralston Avenue.  Another pivotal project is the development of a citywide Transportation Master Plan, to help guide the City for its future growth.

Private development has grown significantly in the City the last 5 years, including biolife sciences, housing, and mixed-use developments.  Most notable are the Conceptual Development Plan and Development for the Belmont Stanford Campus at Notre Dame de Namur University and the Annexation of the Harbor Industrial Area from the County of San Mateo.

This invitation is focused on recruiting a Senior Engineer for private development and permitting services.  Key assignments include leading staff and managing consultants and contractors through the private development process, as well as managing the permitting services.  However, the Senior Engineer may be assigned to work in any of the work areas mentioned above.

In addition, the Senior Engineer assists in preparing and monitoring operating budgets in connection with assigned programs and contract management.  Effective communication skills and the ability to recognize the interconnectedness of the various civil disciplines and stakeholders are critical to the success of this position.  This position is public-facing and may be needed in planning commissions and city council meetings.  This position involves direct supervision of a growing team of 3-4 staff members, which may include engineers, engineering technicians, and contract staff.

Generally, the Senior Civil Engineer supervises, assigns, reviews, and participates in the work of staff responsible for performing professional and technical engineering services in the design and management of public works capital improvement projects, private development, permitting and other services, ensuring high work quality and adherence to established policies and procedures.

Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned.  Employees perform the most difficult and responsible types of duties assigned to classes within this series, including management of the most complex engineering projects or exercising lead direction over lower-level staff.  Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility.

The responsibilities and duties of the Senior Civil Engineer may include, but are not limited to, the following:

• Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for providing professional engineering services in the design and management of public works capital improvement projects.
• Establish schedules and methods for providing engineering services, identify resource needs, review needs with appropriate management staff, and allocate resources accordingly.
• Participate in the development of policies and procedures, monitor work activities to ensure compliance with established policies and procedures, and make recommendations for changes and improvement to existing standards and procedures.
• Recommend and assist in the implementation of goals and objectives and implement approved policies and procedures.
• Perform the more technical and complex tasks of the work unit, including management and administration of construction and professional services contracts.
• Supervise and participate in the work of lower-level engineering staff in the preparation of project plans, specification, cost estimates, and contract administration for capital projects.
• Supervise and participate in the inspection of capital projects, ensure compliance with applicable codes and regulations and provide resolutions to construction problems.
• Prepare and/or review professional civil engineering designs for assigned projects utilizing a variety of computer software programs, perform detailed calculations and computations, and prepare and/or review the adequacy and accuracy of computations, preliminary layouts, and design work from field and survey data.
• Review and approve changes to approved plans and specifications and process a variety of permits.
• Exercise professional engineering judgment in accordance with current accepted practice of civil engineering and appropriate laws and codes.
• Participate in the selection of technical engineering staff, provide or coordinate staff training, work with employees to correct deficiencies, and implement discipline procedures.
• Participate in the preparation and administration of assigned engineering program budget, submit budget recommendations and monitor expenditures.

To review the complete job description, visit www.belmont.gov

 

General

The Procurement Administrator II reports to a Procurement Administrator III in Contracts and Procurement and is responsible for preparing and processing Invitations for Bids (IFBs), Requests for Proposals (RFPs), Requests for Quotations (RFQs), and Purchase Orders (PO’s) for the procurement of goods, materials, equipment, professional services, and public works.

Essential Functions & Duties

 

• Manage all phases of the procurement process in compliance with applicable local, state and federal laws, rules, regulations, and policies governing public agency purchasing (e.g. California Labor Code, Prevailing Wage, and California Contract Code).
• Review solicitation requirements for reasonableness, recommend contract type, determine appropriate procurement strategy, and method of compensation.
• Develop terms and conditions and solicitation provisions.
• Lead contract negotiations to achieve best overall value for the agency. 
• Perform contract administration (e.g., administer contract amendments, prepare in-house memoranda, and correspond with vendors and legal staff).  

 
EXAMPLES OF DUTIES: 

• Authorize award of contracts and approve purchases, contract amendments, and work directives consistent with District policy and procedures.
• Prepare and issue professional service agreement work directives. Negotiate and maintain rate agreements and any adjustments in mark-ups or indirect rates with consultants in coordination with project managers. 
• Maintain contract records that includes print and website advertising, leading pre-bid/proposal meetings, lead site walk-throughs, respond to requests for approved equals, address questions and requests for clarification, conduct public bid openings, analyze bids received, determine responsiveness and responsibility of apparent low bidders, check references and perform cost/price analyses. 
• Manage and perform contract activities using PeopleSoft. 
• Develop contract language by collaborating with subject matter experts from such areas as Risk Management, Disadvantaged Business Enterprise (DBE), Labor Compliance, Project Management, Finance, Capital Grants, and Legal Counsel.
• Research and evaluate sole source procurement requests.
• Provide guidance to Project Managers on all aspects of the procurement solicitation and contracting process. This includes evaluating scope of work, identifying evaluation criteria, and developing timelines.
• Prepare written reports and contract award recommendations. 
• Provide guidance and administration on a wide variety of contracts. 
• Interface with government, and transit agencies.
• Perform all job duties and responsibilities in a safe manner to protect one’s self, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

 

Minimum Qualifications

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to:

• Bachelor’s degree in Business Administration, Economics, or related field.
• Three (3) years relevant full-time professional-level experience with procurement and administration of equipment, material, maintenance, public works, and professional or other services-type contracts. 

PREFERRED QUALIFICATIONS:

• Experience in public agency purchasing is highly desired. 
• One or more of the following Professional procurement certifications is desired: 
• Certified Professional Public Buyer (CPPB), 
• Certified Public Procurement Officer (CPPO), 
• Certified Purchasing Manager (CPM), or 
• Certified Professional Supply Management (CPSM).
• Construction Experience preferred
• Working knowledge of an Enterprise Resource Program (ERP) such as PeopleSoft, SAP, JD Edwards, and Oracle. 
• Proficient in Microsoft Word and Excel
• Effective verbal and written communication skills. 

SELECTION PROCESS MAY INCLUDE: The process will include a panel interview and may include written and skills test assessments or supplemental questions. Only those candidates who are the most qualified will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to continue in the process.

 

Additional Information

 

 How to Apply

• Complete an online employment application by 11:59 p.m. of the listed closing date.  A resume will not be accepted in lieu of the application.  Incomplete applications will not be considered. 

• The Human Resources Department will make reasonable efforts in the recruitment/examination process to accommodate applicants with disabilities upon request.  If you have a need for an accommodation, please contact the Human Resources Department.   

• We celebrate diversity and are committed to creating an inclusive and welcoming workplace environment.  We are an Affirmative Action/Equal Opportunity Employer.  Minorities, Women, Persons with Disabilities and Veterans are encouraged to apply. 

 

The selection process may include a panel interview, written and skills test assessments, or supplemental questions.  Only those candidates who are the most qualified will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to continue in the process.      

 

How to Apply

• Complete an online employment application by 11:59 p.m. of the listed closing date.  A resume will not be accepted in lieu of the application.  Incomplete applications will not be considered. 

• The Human Resources Department will make reasonable efforts in the recruitment/examination process to accommodate applicants with disabilities upon request.  If you have a need for an accommodation, please contact the Human Resources Department.   

• We celebrate diversity and are committed to creating an inclusive and welcoming workplace environment.  We are an Affirmative Action/Equal Opportunity Employer.  Minorities, Women, Persons with Disabilities and Veterans are encouraged to apply. 

The City of Saratoga is currently recruiting to fill a full-time Accounting Technician position within the Administrative Services Department. The incumbent will report to the Finance Manager.

The Accounting Technician, under general supervision, performs journey-level technical and administrative account support duties associated with preparing, maintaining, and processing accounts receivable and accounts payable records and transactions. The incumbent’s duties include reconciling accounts and ledgers, preparing financial reports, batch runs and wire transfers, tracking and maintaining manual and computerized accounting and financial records, establishing and updating vendor records, and performing related duties as assigned. The incumbent will be assigned to the Accounts Payable and Program Procurement Support responsibilities.

The Technician will have knowledge of and proficiency in: Terminology and practices of financial and account document processing and record-keeping, including accounts receivable, accounts payable, utility billing, and business licensing; Methods and techniques or preparing and maintaining records of financial transactions; Methods and techniques of researching and resolving accounting transactional discrepancies; Business arithmetic and basic accounting and financial management knowledge; Record-keeping principles and procedures; Applicable federal, state, and local laws, codes, and ordinances relevant to the area(s) of responsibility; and related areas necessary to perform the essential functions of the position.

City offices operate on a 9/80 schedule. This position is located at City Hall, 13777 Fruitvale Avenue; operational hours are 7:30 am-5:00 pm.

View the complete job description here.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

 

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

 

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

  

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

 

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

 

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.