Search Jobs

Please note that applications are currently not accepted through CalOpps or any other third-party job board application system. To apply, applicants must complete an application via the City of San Jose’s website at www.sanjoseca.gov/ citycareers.

Per the City’s COVID19 Mandatory Vaccination Policy, the City requires all employees starting on or after February 11, 2022 to provide proof of vaccination as a condition of employment absent a documented medical and/or religious exemption.  Proof of vaccination means that employees are required to be “up-to-date” with regards to the COVID-19 vaccine. Consistent with the Santa Clara County Public Health Order issued on December 28, 2021, "up-to-date" means that employees are required to be vaccinated with the entire recommended initial series of a COVID-19 vaccine (two doses of the Pfizer, Moderna or Novavax COVID-19 vaccine or a single dose of the Johnson & Johnson COVID-19 vaccine).   

Salary Information

The annual salary range for Wastewater Mechanic I is $76,689.60 - $93,225.60, hourly range is now $36.87 - $44.82. The annual salary range for Wastewater Mechanic II is $84,905.60 - $103,500.80, hourly range is now $40.82 - $49.76. The actual salary shall be determined by the final candidate’s qualifications and experience. (Note: Candidates are typically hired at the level of Wastewater Mechanic I. Candidates may be considered for level II if they possess two years of experience at the level of Wastewater Mechanic I or possess a CWEA Plant Mechanical Technologist Grade II certificate.)

Wastewater Mechanic - Maintenance Division

Wastewater Mechanics for the Maintenance Division are responsible for performing the full range of technical and mechanical tasks associated with the preventive and corrective maintenance of wastewater plant machinery and equipment. In this job, you may assist Sr. Wastewater Mechanics in the more difficult and complex duties. You will have the opportunity to attend training to understand the equipment better and keep current on trends. Mechanics are expected to work well independently and on teams.

The following is a partial list of Wastewater Mechanics typical responsibilities in the Maintenance section:

• Troubleshoots and repairs wastewater buildings and equipment such as pumps, valves, gearboxes, compressors, blowers, grit removal equipment, conveyors, mixers, clarifiers, chemical feed systems, and other equipment.
• Fabricates and modifies parts as needed for system operations associated with shop equipment drill presses, ironworker, band saws, pedestal grinders, hydraulic shear, and knowledge of welding.
• Operates bridge cranes, chain falls, lever hoists and all associated rigging.
• Interprets drawings, service manuals and parts manuals.
• Performs equipment inspections at scheduled intervals to detect the possibility of malfunctions.
• Determines spare parts inventory levels and initiates parts replacement; stocks replacement parts.
• Maintains maintenance and repair records on equipment, systems, and components; assists in maintaining and updating the maintenance manuals.
• Communicates to supervisor concerning work progress, including present and potential work problems and suggestions for new or improved ways of addressing such issues.
• Can, or can learn to, work with computer-based work order and inventory management software to create, complete and track maintenance work and parts used.

The Regional Wastewater Facility is a 24/7 operation serving the South Bay. Typical schedules for Maintenance Division Wastewater Mechanics are 4x10s. Wastewater Mechanics may be called upon to work overtime, holidays, or alternative shifts in support of the facility.

For more information about San Jose-Santa Clara Regional Wastewater Facility (RWF), please visit the City of San Jose website.

This recruitment may be used to fill multiple positions in these, or other divisions. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.

Physical Requirements

• Duties require a heavy level of physical exertion, including exerting up to 100 pounds of force occasionally, and or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.
• Incumbents may be required to utilize self-contained breathing apparatus (SCBA) equipment, which requires the ability to pass an annual fit and spirometry test.
• Ability to perform the essential physical functions of this position will be determined by a post-offer medical examination conducted by City of San Jose Employee Health Services.

For the complete physical/environment elements, please go to the classification specifications here: Wastewater Mechanic I/II.

Please note that applications are currently not accepted through CalOpps or any other third-party job board application system. To apply, applicants must complete an application via the City of San Jose’s website at www.sanjoseca.gov/ citycareers.

Vaccination Policy: Per the City’s COVID19 Mandatory Vaccination Policy, the City requires all employees starting on or after February 11, 2022 to provide proof of vaccination as a condition of employment absent a documented medical and/or religious exemption.  Proof of vaccination means that employees are required to be “up-to-date” with regards to the COVID-19 vaccine. Consistent with the Santa Clara County Public Health Order issued on December 28, 2021, "up-to-date" means that employees are required to be vaccinated with the entire recommended initial series of a COVID-19 vaccine (two doses of the Pfizer, Moderna or Novavax COVID-19 vaccine or a single dose of the Johnson & Johnson COVID-19 vaccine).    

Salary Information 

The annual salary range for Wastewater Mechanic I is $76,689.60 - $93,225.60, hourly range is now $36.87 - $44.82. The annual salary range for Wastewater Mechanic II is $84,905.60 - $103,500.80, hourly range is now $40.82 - $49.76. The actual salary shall be determined by the final candidate’s qualifications and experience. (Note: Candidates are typically hired at the level of Wastewater Mechanic I. Candidates may be considered for level II if they possess two years of experience at the level of Wastewater Mechanic I or possess a CWEA Plant Mechanical Technologist Grade II certificate.)

Wastewater Mechanic - Energy and Automation Division

Wastewater Mechanics (also known as Cogen Operator / Diesel Mechanic) in the Energy and Automation Division are responsible for operating, maintaining and overhauling the Facility's industrial mechanical and electrical equipment related to large stationary diesel-ignited/spark-ignited engine driven blowers and/or power generators, gas compressors and gas storage such as commonly found in municipal power plants, natural gas pipeline compressor stations and large marine propulsion systems. The Wastewater Mechanics (Cogen Operator / Diesel Mechanics) often work in teams of two while performing preventative maintenance, repairs, and overhauls on Facility equipment. This team provides 24/7 staffing and are typically assigned to rotating shifts including nights, weekends and holidays.

The Cogen Operator / Diesel Mechanics also perform tasks including, but not limited to, the following:

• Preventive maintenance and inspections of all equipment in the Power and Air (P&A) section.
• Use precision measuring tools, granite table, non destructive testing, Prussian blue, polishing stones, fitting bearings to shafts.
• Various welding disciplines (such as arc, tig, mig) as well as oxy-acetylene and plasma/carbon arc cutting.

• Fabricate specialty tools, obsolete engine parts, and fixtures.
• Operate bridge cranes, chain falls, lever hoists and all associated rigging.
• Interpret drawings, service manuals and parts manuals.
• Operate seat grinder, valve grinder, drill press, band saw, vertical mill, engine lathe, iron worker, sheet metal brake and surface grinder as well as forklift and man lift.
• Repair and inspect of low and high pressure-piping systems.
• Work with electricians, instrumentation technicians, painters, HVAC and other mechanics
• Attend all safety trainings.

This recruitment may be used to fill multiple positions in these, or other divisions. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.

Physical Requirements

• Duties require a heavy level of physical exertion, including exerting up to 100 pounds of force occasionally, and or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.
• Incumbents may be required to utilize self-contained breathing apparatus (SCBA) equipment, which requires the ability to pass an annual fit and spirometry test.
• Ability to perform the essential physical functions of this position will be determined by a post-offer medical examination conducted by City of San Jose Employee Health Services.

For the complete physical/environment elements, please go to the classification specifications here: Wastewater Mechanic I/II.

For more information about San Jose-Santa Clara Regional Wastewater Facility (RWF), click here.

The Power Resources Specialist I/II position reports to a Principal Power Resources Specialist in the Power Resources Division. This position is part of an exciting, fast-paced team responsible for procuring hundreds of megawatts of renewable energy projects. The selected candidate will have the following duties and responsibilities: 

• Supports the preparation, issuing, and evaluation of solicitations for long term renewable energy, energy storage services, Resource Adequacy, energy and other power products, including overseeing or supporting consultants.  

• Plans and supports the negotiation and execution of power contracts, including facilitating complying with City contract execution requirements. 

• Assists in the management, analyzing, and enforcing of power contracts, including long term renewable energy contracts through development, construction, and operation.  

• Assists in efforts to pursue opportunities for the City to develop City-owned power assets.  
• Participates in completing analysis and prepare procurement plans, including managing consultants, developing procurement strategies.  
• Supports and undertakes projects related to power, procurement, and validation; assists in the approval of energy purchases or sales of surplus energy.
• Collaborates with the regulatory team in drafting required regulatory filings such as integrated resources plans and renewable procurement plans.  
• Collaborates with the account management team to develop new products desired by customers, such as direct renewables and feed-in-tariffs.  
• Participates in joint procurement with other Community Choice Aggregators (CCAs) and CA Community Power.  
• Develops and maintain relationships with power suppliers and consultants. 
• Assures compliance with Federal, State, and local requirements.  

The ideal candidate is a highly motivated individual with strong analytical, quantitative and problem-solving skills. The candidate should have effective communication skills, show attention to detail, and be able to work independently. Candidates that are highly collaborative with colleagues and outside stakeholders are ideal. 

This recruitment may be used to fill multiple positions in this, or other divisions or departments. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.

Per the City’s COVID19 Mandatory Vaccination Policy, the City requires all employees starting on or after February 11, 2022, to provide proof of vaccination as a condition of employment absent a documented medical and/or religious exemption. Proof of vaccination means that employees are required to be “up-to-date” with regards to the COVID-19 vaccine. Consistent with the Santa Clara County Public Health Order issued on December 28, 2021, "up-to-date" means that employees are required to be vaccinated with the entire initial series of a COVID-19 vaccine (two doses of the Pfizer, Moderna or Novavax COVID-19 vaccine or a single dose of the Johnson & Johnson COVID-19 vaccine. 

Please note that applications are currently not accepted through CalOpps or any other third-party job board application system. To apply, applicants must complete an application via the City of San Jose’s website at www.sanjoseca.gov/ citycareers.

Salary Information:

The total annual salary range for a Power Resources Specialist I is $93,868.32 - $114,397.92.The total annual salary range for a Power Resources Specialist II is: $102,145.68 - $124,444.32. These ranges include an approximate five percent (5%) ongoing non-pensionable pay. Actual pay shall be determined by the candidates' qualifications and experience.

Competencies: 

The ideal candidate will possess the following competencies, as demonstrated in past and current employment history. Desirable competencies for this position include: 

• Job Expertise – Demonstrates knowledge of and experience with applicable professional/technical principles, practices, Citywide and departmental procedures, policies, federal, state rules and regulations. 
• Collaboration – Develops networks and builds relationships; engages in cross-functional activities. 
• Project Management - Ensures support for and drives projects, implements goals towards strategic objectives. 
• Fiscal Management – Understands the relationship of the budget and resources to the strategic plan; complies with administrative controls over funds, contracts, and procurements.  
• Analytical Thinking – Approaches problems or situations using a logical, systematic, sequential approach. 
• Planning - Acts to align own unit's goals with the strategic direction of the organization; defines tasks and milestones to achieve objectives, while ensuring the optimal use of resources to meet those objectives. 
• Problem Solving – Approaches situations or problems by defining the issue; determines the significance & priority, collects information from various sources; uses logic & intuition to make decisions and solution sets & outcomes. 
• Communication Skills – Effectively conveys information, expresses thoughts and facts clearly, orally and in writing; demonstrates effective use of listening skills, displays openness to other's ideas and thoughts. 
• Teamwork & Interpersonal Skills – Develops effective relationships with co-workers and supervisors by helping others accomplish tasks and using collaboration and conflict resolution skills.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.
 

The Process Control Technician performs a variety of technical and professional engineering duties related to the design, installation, set-up, programming, troubleshooting and maintenance of hardware, software and instrumentation associated with the District’s Supervisory Control and Data Acquisition (SCADA) systems.

They support Operations and Maintenance by troubleshooting, researching, designing, purchasing, and installing field instrumentation, programmable logic controller (PLC), operator interface terminals (OIT), variable speed drives, electrical systems, and other appurtenances. The Process Control Technician provides PLC and OIT programming and installation support making programming changes as required for the efficient operation of new and existing District facilities.

To Apply Online, click here: SID Online Application Form

Qualifications
Any combination of training, education and experience which demonstrates possession of the knowledge and abilities stated above and the ability to perform the duties of the position.

Experience and Education

• Graduation from high school or equivalent, supplemented by college or equivalent course work in engineering, electronics, instrumentation, control systems, and/or computer systems.
• Two years of increasingly responsible experience involving the configuration and programming of process control, instrumentation and operator interface terminals.
• A Bachelor’s degree in mechanical engineering or a closely related field from an accredited college or university is desirable.

Licenses and Certification

• Possession of a valid and appropriate California Driver License with a satisfactory driving record to maintain insurability.
• Possession of a State Water Resources Control Board Distribution Operator Certification for Grade D1 is desirable.

Application materials, a full job description, and benefit information is available at https://www.sidwater.org/Jobs.aspx

Final filing date: Open until filled, first review date 03/22/2023 at 5 p.m.

Please note that applications are currently not accepted through CalOpps or any other third party job board application system. To apply, applicants must complete an application via the City of San Jose’s website at www.sanjoseca.gov/citycareers. 

The annual salary range for this position is:

$117,979.68 - $149,363.76 (Exempt) 

Total salary is inclusive of a 5% non-pensionable increase. The actual salary will be determined by the selected candidate’s qualifications and experience.  

The San José Fire Department (SJFD) is seeking to fill multiple Associate Engineer positions in the Bureau of Fire Prevention (BFP). The Bureau of Fire Prevention (BFP) Development Division contributes to the Department’s mission through its primary focus on key areas of responsibility that include; public education and outreach services, investigation of fires to determine cause and origin, and code compliance activities such as plan review and inspection.

For more information about BFP, please click here.

Under the general supervision of a Senior Engineer, the Associate Engineer position performs a variety of professional engineering, plan review, and inspection work.

Typical duties include, but are not limited to the following:

• Examine plans, perform calculations and review specifications for commercial, industrial, and residential buildings for compliance with the California Building Code, California Fire Code, California State Fire Marshal regulations, and  applicable NFPA standards and local ordinances.
• Provide technical advice to consultants, architects, engineers, contractors, developers, department officers and staff, and the Fire Marshal on the application or interpretation of fire safety codes/regulations, and on the resolution of fire safety issues found in the preliminary design of buildings.
• Analyze and evaluate proposals for alternate materials, methods of construction, and/or variances to fire safety codes and regulations.
• Conduct field inspections to ensure that the finished construction complies with approved plans.

The subject of the incumbent’s tasks will be focused on one or more of the following Sections of BFP areas: Building Life Safety Systems, Fire Suppression Systems, Fire Detection/Fire Alarm Systems, Hazardous Materials and Site Development.

This recruitment may be used to fill multiple positions in this, or other divisions or departments. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.

Description

DEADLINE TO APPLY: First Review: Friday, February 17, 2023 @ 5:00 PM PST
 

THE DEPARTMENT
The Department of Public Works and Utilities is comprised of six divisions that work collaboratively to develop, build, operate, and maintain Hayward's infrastructure. The Department is responsible for providing engineering and transportation support to City operating departments and divisions and for implementation of the City's Capital Improvement Program, all while providing excellent customer service to the community.  

DEFINITION 
To perform a variety of paraprofessional office and field engineering work including drafting, minor design work, engineering records preparation and maintenance and operation of equipment and instruments; may work as survey crew member in support of surveying and other civil and traffic engineering functions.

DISTINGUISHING CHARACTERISTICS 
This is an entry level classification that assists higher level technical and professional engineers in all activities of the Engineering & Transportation Division. The Engineering Technician is responsible for conducting traffic, engineering and similar studies for public works projects, and for assigned technical engineering tasks, preparing plans and estimating for various design and construction activities. It is distinguished from the Assistant Civil Engineer which is the journey level classification with responsibility of the more complicated technical tasks. 

 

Essential Duties

Duties may include, but are not limited to, the following: 

Performs non-routine drafting assignments which require application of standardized drawing technique
Gathers field data for planning, design and construction. 
Prepares accurate drawings from design notes, sketches and field survey notes. 
Makes traffic counts and prepares simple diagrams of intersections showing sight distances and traffic flow. 
Makes speed surveys, polls motorists and pedestrians, and prepares diagrams of accident frequencies.

ESSENTIAL DUTIES
Makes computations to determine quantities and costs. Performs complex mathematical calculations by using accepted formulas, manuals and equipment. Reads and interprets maps and other engineering records and prepares legal descriptions of property. Corrects and re-designs construction plans for street improvements, utility installations, drainage and material quantities by using appropriate calculations, computations and engineering data and by consulting with engineers. Performs survey office work using drafting tools while employing mathematical and engineering data to prepare information for use by survey field crews, construction crews and construction inspectors. Interprets information from survey field work for use in mapping, designing construction plans, analyzing earthquake fault monitoring data and updating survey records. Performs various duties associated with land surveying including using measuring tapes and level rods to assist in determining lines, angles, points, elevations and distances. Performs various record keeping and file maintenance duties such as recording instrument readings in field survey notes, maintaining office files of notes, control data, monument records, surveyors maps, and construction drawings. Prepares and maintains accurate “as-built” plans from notes from contractors of completed projects. Computes horizontal and vertical curves. Calculates distances, earth work quantities, fees and charges. Performs plan checking by comparing drawings of proposed improvements against drawings which illustrates established engineering standards applicable to various projects.

JOB RELATED AND ESSENTIAL QUALIFICATIONS
 
Knowledge of: Algebra, geometry and trigonometry. 
Proficient in AutoCAD Civil 3D drafting including working with raw topographic survey points to build surfaces, produce maps, renderings, view graphs, cross-sections and plan and profiles.

Ability to:
Perform basic engineering and surveying calculations.
Interpret construction drawings, field survey notes, deeds, maps and other legal descriptions and to extract pertinent information. 
Maintain neat and accurate records. 
Understand and carry out oral and written instructions. 
Communicate effectively orally and in writing. 
Establish and maintain cooperative and effective relationships with those contacted in the course of work. 
Visualize the practical application of designs. 
Manage extensive public contact. 
Draft engineering plans from rough layouts. 
Prepare exhibits using a variety of software applications.

Minimum Qualifications

Any combination that would likely provide the required knowledge and abilities to perform the duties of this position would be qualifying.  A typical way to obtain them would be: 

Experience: Two (2) years of experience in engineering drafting and calculations, performing responsibilities related to engineering design, construction, inspection and or traffic.

Education: Equivalent to completion of the twelfth grade supplemented by courses in algebra, geometry, trigonometry land surveying, engineering design, construction inspection, and or traffic engineering. An Associate degree in a related field is desirable.

Training: Any recent training such as academic courses, and certification programs which are relevant to this job classification.

License and Certificates: Possession of a valid Class C California driver's license and satisfactory driving record as determined by the City.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.